NAME
Srv, dirread9p, emalloc9p, erealloc9p, estrdup9p, listensrv, postfd, postmountsrv, readbuf, readstr, respond, responderror, threadlistensrv, threadpostmountsrv, srv – 9P file service

SYNOPSIS
#include <u.h>
#include <libc.h>
#include <fcall.h>
#include <thread.h>
#include <9p.h>

typedef struct Srv {
Tree* tree;
void    (*attach)(Req *r);
void    (*auth)(Req *r);
void    (*open)(Req *r);
void    (*create)(Req *r);
void    (*read)(Req *r);
void    (*write)(Req *r);
void    (*remove)(Req *r);
void    (*flush)(Req *r);
void    (*stat)(Req *r);
void    (*wstat)(Req *r);
void    (*walk)(Req *r);
char* (*walk1)(Fid *fid, char *name, Qid *qid);
char* (*clone)(Fid *oldfid, Fid *newfid);
void    (*destroyfid)(Fid *fid);
void    (*destroyreq)(Req *r);
void    (*end)(Srv *s);
void* aux;
int     infd;
int     outfd;
int     srvfd;
int     nopipe;
} Srv;

int     srv(Srv *s)
void    postmountsrv(Srv *s, char *name, char *mtpt, int flag)
void    threadpostmountsrv(Srv *s, char *name, char *mtpt, int flag)
void    listensrv(Srv *s, char *addr)
void    threadlistensrv(Srv *s, char *addr)
int     postfd(char *srvname, int fd)
void    respond(Req *r, char *error)
void    responderror(Req*)
void    readstr(Req *r, char *src)
void    readbuf(Req *r, void *src, long nsrc)
typedef int Dirgen(int n, Dir *dir, void *aux)
void    dirread9p(Req *r, Dirgen *gen, void *aux)
void    walkandclone(Req *r, char *(*walk1)(Fid *old, char *name, void *v),
char *(*clone)(Fid *old, Fid *new, void *v), void *v)

void* emalloc9p(ulong n)
void* erealloc9p(void *v, ulong n)
char* estrdup9p(char *s)

extern int chatty9p;

DESCRIPTION
The function srv serves a 9P session by reading requests from s–>infd, dispatching them to the function pointers kept in Srv, and writing the responses to s–>outfd. (Typically, postmountsrv or threadpostmountsrv initializes the infd and outfd structure members. See the description below.)

Req and Fid structures are allocated one–to–one with uncompleted requests and active fids, and are described in 9pfid(2).

The behavior of srv depends on whether there is a file tree (see 9pfile(2)) associated with the server, that is, whether the tree element is nonzero. The differences are made explicit in the discussion of the service loop below. The aux element is the client's, to do with as it pleases.

Srv does not return until the 9P conversation is finished. Since it is usually run in a separate process so that the caller can exit, the service loop has little chance to return gracefully on out of memory errors. It calls emalloc9p, erealloc9p, and estrdup9p to obtain its memory. The default implementations of these functions act as malloc, realloc, and strdup but abort the program if they run out of memory. If alternate behavior is desired, clients can link against alternate implementations of these functions.

Postmountsrv and threadpostmountsrv are wrappers that create a separate process in which to run srv. They do the following:
If s–>nopipe is zero (the common case), initialize s–>infd and s–>outfd to be one end of a freshly allocated pipe, with s–>srvfd initialized as the other end.
If name is non–nil, call postfd(s–>srvfd, name) to post s–>srvfd as /srv/name.
Fork a child process via rfork (see fork(2)) or procrfork (see thread(2)), using the RFFDG, RFNAMEG, and RFMEM flags. The child process calls close(s–>srvfd) and then srv(s); it will exit once srv returns.
If mtpt is non–nil, call amount(s–>srvfd, mtpt, flag, ""); otherwise, close s–>srvfd.
The parent returns to the caller.

If any error occurs during this process, the entire process is terminated by calling sysfatal (see perror(2)).

Listensrv and threadlistensrv create a separate process to announce as addr. The process listens for incoming connections, creating a new process to serve each. Using these functions results in srv and the service functions being run in multiple processes simultaneously. The library locks its own data structures as necessary; the client may need to lock data it shares between the multiple connections.

Service functions
The functions in a Srv structure named after 9P transactions are called to satisfy requests as they arrive. If a function is provided, it must arrange for respond to be called when the request is satisfied. The only parameter of each service function is a Req* parameter (say r). The incoming request parameters are stored in r–>ifcall; r–>fid and r–>newfid are pointers to Fid structures corresponding to the numeric fids in r–>ifcall; similarly, r–>oldreq is the Req structure corresponding to r–>ifcall.oldtag. The outgoing response data should be stored in r–>ofcall. The one exception to this rule is that stat should fill in r–>d rather than r–>ofcall.stat: the library will convert the structure into the machine–independent wire representation. Similarly, wstat may consult r–>d rather than decoding r–>ifcall.stat itself. When a request has been handled, respond should be called with r and an error string. If the request was satisfied successfully, the error string should be a nil pointer. Note that it is permissible for a function to return without itself calling respond, as long as it has arranged for respond to be called at some point in the future by another proc sharing its address space, but see the discussion of flush below. Once respond has been called, the Req* as well as any pointers it once contained must be considered freed and not referenced.

Responderror calls respond with the system error string (see errstr(2)).

If the service loop detects an error in a request (e.g., an attempt to reuse an extant fid, an open of an already open fid, a read from a fid opened for write, etc.) it will reply with an error without consulting the service functions.

The service loop provided by srv (and indirectly by postmountsrv and threadpostmountsrv) is single–threaded. If it is expected that some requests might block, arranging for alternate processes to handle them is suggested.

The constraints on the service functions are as follows. These constraints are checked while the server executes. If a service function fails to do something it ought to have, srv will call endsrv and then abort.
Auth   If authentication is desired, the auth function should record that r–>afid is the new authentication fid and set r–>afid–>qid and ofcall.qid. Auth may be nil, in which case it will be treated as having responded with the error ``argv0: authentication not required,'' where argv0 is the program name variable as set
by ARGBEGIN (see arg(2)).
AttachThe attach function should check the authentication state of afid if desired, and set r–>fid–>qid and ofcall.qid to the qid of the file system root. Attach may be nil only if file trees are in use; in this case, the qid will be filled from the root of the tree, and no authentication will be done. Walk   If file trees are in use, walk is handled internally, and srv–>walk is never called.
If file trees are not in use, walk should consult r–>ifcall.wname and r–>ifcall.nwname, filling in ofcall.qid and ofcall.nqid, and also copying any necessary aux state from r–>fid to r–>newfid when the two are different. As long as walk sets ofcall.nqid appropriately, it can respond with a nil error string even when 9P demands an error (e.g., in the case of a short walk); the library detects error conditions and handles them appropriately.
Because implementing the full walk message is intricate and prone to error, the helper routine walkandclone will handle the request given pointers to two functions walk1 and (optionally) clone . Clone, if non–nil, is called to signal the creation of newfid from oldfid. Typically a clone routine will copy or increment a reference count in oldfid's aux element. Walk1 should walk fid to name, initializing fid–>qid to the new path's qid. Both should return nil on success or an error message on error. Walkandclone will call respond after handling the request.
Walk1, Clone
If the client provides functions srv–>walk1 and (optionally) srv–>clone, the 9P service loop will call walkandclone with these functions to handle the request. Unlike the walk1 above, srv–>walk1 must fill in both fid–>qid and *qid with the new qid on a successful walk.
Open   If file trees are in use, the file metadata will be consulted on open, create, remove, and wstat to see if the requester has the appropriate permissions. If not, an error will be sent back without consulting a service function.
If not using file trees or the user has the appropriate permissions, open is called with r–>ofcall.qid already initialized to the one stored in the Fid structure (that is, the one returned in the previous walk). If the qid changes, both should be updated.
CreateThe create function must fill in both r–>fid–>qid and r–>ofcall.qid on success. When using file trees, create should allocate a new File with createfile; note that createfile may return nil (because, say, the file already exists). If the create function is nil, srv behaves as though it were a function that always
responded with the error ``create prohibited''.
Remove
Remove
should mark the file as removed, whether by calling removefile when using file trees, or by updating an internal data structure. In general it is not a good idea to clean up the aux information associated with the corresponding File at this time, to avoid memory errors if other fids have references to that file. Instead, it is suggested that remove simply mark the file as removed (so that further operations on it know to fail) and wait until the file tree's destroy function is called to reclaim the aux pointer. If not using file trees, it is prudent to take the analogous measures. If remove is not provided, all remove requests will draw ``remove prohibited'' errors.
Read   The read function must be provided; it fills r–>ofcall.data with at most r–>ifcall.count bytes of data from offset r–>ifcall.offset of the file. It also sets r–>ofcall.count to the number of bytes being returned. If using file trees, srv will handle reads of directories internally, only calling read for requests on
files. Readstr and readbuf are useful for satisfying read requests on a string or buffer. Consulting the request in r–>ifcall, they fill r–>ofcall.data and set r–>ofcall.count; they do not call respond. Similarly, dirread9p can be used to handle directory reads in servers not using file trees. The passed gen function will be called as necessary to fill dir with information for the nth entry in the directory. The string pointers placed in dir should be fresh copies made with estrdup9p; they will be freed by dirread9p after each successful call to gen. Gen should return zero if it successfully filled dir, minus one on end of directory.
WriteThe write function is similar but need not be provided. If it is not, all writes will draw ``write prohibited'' errors. Otherwise, write should attempt to write the r–>ifcall.count bytes of r–>ifcall.data to offset r–>ifcall.offset of the file, setting r–>ofcall.count to the number of bytes actually written. Most
programs consider it an error to write less than the requested amount.
Stat   Stat should fill r–>d with the stat information for r–>fid. If using file trees, r–>d will have been initialized with the stat info from the tree, and stat itself may be nil.
WstatThe wstat consults r–>d in changing the metadata for r–>fid as described in stat(5). When using file trees, srv will take care to check that the request satisfies the permissions outlined in stat(5). Otherwise wstat should take care to enforce permissions where appropriate.
Flush   Servers that always call respond before returning from the service functions need not provide a flush implementation: flush is only necessary in programs that arrange for respond to be called asynchronously. Flush should cause the request r–>oldreq to be cancelled or hurried along. If oldreq is cancelled, this
should be signalled by calling respond on oldreq with error string `interrupted'. Flush must respond to r with a nil error string. Flush may respond to r before forcing a response to r–>oldreq. In this case, the library will delay sending the Rflush message until the response to r–>oldreq has been sent.

Destroyfid, destroyreq, and end are auxiliary functions, not called in direct response to 9P requests.
Destroyfid
When a Fid's reference count drops to zero (i.e., it has been clunked and there are no outstanding requests referring to it), destroyfid is called to allow the program to dispose of the fid–>aux pointer.
Destroyreq
Similarly, when a Req's reference count drops to zero (i.e., it has been handled via respond and other outstanding pointers to it have been closed), destroyreq is called to allow the program to dispose of the r–>aux pointer.
End    Once the 9P service loop has finished (end of file been reached on the service pipe or a bad message has been read), end is called (if provided) to allow any final cleanup. For example, it was used by the Palm Pilot synchronization file system (never finished) to gracefully terminate the serial conversation once the
file system had been unmounted. After calling end, the service loop (which runs in a separate process from its caller) terminates using _exits (see exits(2)).

If the chatty9p flag is at least one, a transcript of the 9P session is printed on standard error. If the chatty9p flag is greater than one, additional unspecified debugging output is generated. By convention, servers written using this library accept the –D option to increment chatty9p.

EXAMPLES
Archfs(4), cdfs(4), nntpfs(4), snap(4), and /sys/src/lib9p/ramfs.c are good examples of simple single–threaded file servers. Webfs(4) and sshnet (see ssh(1)) are good examples of multithreaded file servers.

In general, the File interface is appropriate for maintaining arbitrary file trees (as in ramfs). The File interface is best avoided when the tree structure is easily generated as necessary; this is true when the tree is highly structured (as in cdfs and nntpfs) or is maintained elsewhere.

SOURCE
/sys/src/lib9p

SEE ALSO
9pfid(2), 9pfile(2), srv(3), intro(5)

BUGS
The switch to 9P2000 was taken as an opportunity to tidy much of the interface; we promise to avoid such gratuitous change in the future.
Copyright © 2024 Alcatel-Lucent. All rights reserved.