// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// EAX mode, not a NIST standard (yet).
// EAX provides encryption and authentication.
// EAX targets the same uses as NIST's CCM mode,
// but EAX adds the ability to run in streaming mode.

// See
// http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/eax/eax-spec.pdf
// http://www.cs.ucdavis.edu/~rogaway/papers/eax.pdf
// What those papers call OMAC is now called CMAC.

package block

import (
	"fmt";
	"hash";
	"io";
	"os";
)

// An EAXTagError is returned when the message has failed to authenticate,
// because the tag at the end of the message stream (Read) does not match
// the tag computed from the message itself (Computed).
type EAXTagError struct {
	Read		[]byte;
	Computed	[]byte;
}

func (e *EAXTagError) String() string {
	return fmt.Sprintf("crypto/block: EAX tag mismatch: read %x but computed %x", e.Read, e.Computed)
}

func setupEAX(c Cipher, iv, hdr []byte, tagBytes int) (ctrIV, tag []byte, cmac hash.Hash) {
	n := len(iv);
	if n != c.BlockSize() {
		panicln("crypto/block: EAX: iv length", n, "!=", c.BlockSize())
	}
	buf := make([]byte, n);	// zeroed

	// tag = CMAC(0 + iv) ^ CMAC(1 + hdr) ^ CMAC(2 + data)
	cmac = NewCMAC(c);
	cmac.Write(buf);	// 0
	cmac.Write(iv);
	sum := cmac.Sum();
	ctrIV = copy(sum);
	tag = copy(sum[0:tagBytes]);

	cmac.Reset();
	buf[n-1] = 1;
	cmac.Write(buf);	// 1
	cmac.Write(hdr);
	sum = cmac.Sum();
	for i := 0; i < tagBytes; i++ {
		tag[i] ^= sum[i]
	}

	cmac.Reset();
	buf[n-1] = 2;	// 2
	cmac.Write(buf);

	return;
}

func finishEAX(tag []byte, cmac hash.Hash) {
	// Finish CMAC #2 and xor into tag.
	sum := cmac.Sum();
	for i := range tag {
		tag[i] ^= sum[i]
	}
}

// Writer adapter.  Tees writes into both w and cmac.
// Knows that cmac never returns write errors.
type cmacWriter struct {
	w	io.Writer;
	cmac	hash.Hash;
}

func (cw *cmacWriter) Write(p []byte) (n int, err os.Error) {
	n, err = cw.w.Write(p);
	cw.cmac.Write(p[0:n]);
	return;
}

// An eaxEncrypter implements the EAX encryption mode.
type eaxEncrypter struct {
	ctr	io.Writer;	// CTR encrypter
	cw	cmacWriter;	// CTR's output stream
	tag	[]byte;
}

// NewEAXEncrypter creates and returns a new EAX encrypter
// using the given cipher c, initialization vector iv, associated data hdr,
// and tag length tagBytes.  The encrypter's Write method encrypts
// the data it receives and writes that data to w.
// The encrypter's Close method writes a final authenticating tag to w.
func NewEAXEncrypter(c Cipher, iv []byte, hdr []byte, tagBytes int, w io.Writer) io.WriteCloser {
	x := new(eaxEncrypter);

	// Create new CTR instance writing to both
	// w for encrypted output and cmac for digesting.
	x.cw.w = w;
	var ctrIV []byte;
	ctrIV, x.tag, x.cw.cmac = setupEAX(c, iv, hdr, tagBytes);
	x.ctr = NewCTRWriter(c, ctrIV, &x.cw);
	return x;
}

func (x *eaxEncrypter) Write(p []byte) (n int, err os.Error) {
	return x.ctr.Write(p)
}

func (x *eaxEncrypter) Close() os.Error {
	x.ctr = nil;	// crash if Write is called again

	// Write tag.
	finishEAX(x.tag, x.cw.cmac);
	n, err := x.cw.w.Write(x.tag);
	if n != len(x.tag) && err == nil {
		err = io.ErrShortWrite
	}

	return err;
}

// Reader adapter.  Returns data read from r but hangs
// on to the last len(tag) bytes for itself (returns EOF len(tag)
// bytes early).  Also tees all data returned from Read into
// the cmac digest.  The "don't return the last t bytes"
// and the "tee into digest" functionality could be separated,
// but the latter half is trivial.
type cmacReader struct {
	r	io.Reader;
	cmac	hash.Hash;
	tag	[]byte;
	tmp	[]byte;
}

func (cr *cmacReader) Read(p []byte) (n int, err os.Error) {
	// TODO(rsc): Maybe fall back to simpler code if
	// we recognize the underlying r as a ByteBuffer
	// or ByteReader.  Then we can just take the last piece
	// off at the start.

	// First, read a tag-sized chunk.
	// It's probably not the tag (unless there's no data).
	tag := cr.tag;
	if len(tag) < cap(tag) {
		nt := len(tag);
		nn, err1 := io.ReadFull(cr.r, tag[nt:cap(tag)]);
		tag = tag[0 : nt+nn];
		cr.tag = tag;
		if err1 != nil {
			return 0, err1
		}
	}

	tagBytes := len(tag);
	if len(p) > 4*tagBytes {
		// If p is big, try to read directly into p to avoid a copy.
		n, err = cr.r.Read(p[tagBytes:]);
		if n == 0 {
			goto out
		}
		// copy old tag into p
		for i := 0; i < tagBytes; i++ {
			p[i] = tag[i]
		}
		// copy new tag out of p
		for i := 0; i < tagBytes; i++ {
			tag[i] = p[n+i]
		}
		goto out;
	}

	// Otherwise, read into p and then slide data
	n, err = cr.r.Read(p);
	if n == 0 {
		goto out
	}

	// copy tag+p into p+tmp and then swap tmp, tag
	tmp := cr.tmp;
	for i := n + tagBytes - 1; i >= 0; i-- {
		var c byte;
		if i < tagBytes {
			c = tag[i]
		} else {
			c = p[i-tagBytes]
		}
		if i < n {
			p[i] = c
		} else {
			tmp[i] = c
		}
	}
	cr.tmp, cr.tag = tag, tmp;

out:
	cr.cmac.Write(p[0:n]);
	return;
}

type eaxDecrypter struct {
	ctr	io.Reader;
	cr	cmacReader;
	tag	[]byte;
}

// NewEAXDecrypter creates and returns a new EAX decrypter
// using the given cipher c, initialization vector iv, associated data hdr,
// and tag length tagBytes.  The encrypter's Read method decrypts and
// returns data read from r.  At r's EOF, the encrypter checks the final
// authenticating tag and returns an EAXTagError if the tag is invalid.
// In that case, the message should be discarded.
// Note that the data stream returned from Read cannot be
// assumed to be valid, authenticated data until Read returns
// 0, nil to signal the end of the data.
func NewEAXDecrypter(c Cipher, iv []byte, hdr []byte, tagBytes int, r io.Reader) io.Reader {
	x := new(eaxDecrypter);

	x.cr.r = r;
	x.cr.tag = make([]byte, 0, tagBytes);
	x.cr.tmp = make([]byte, 0, tagBytes);
	var ctrIV []byte;
	ctrIV, x.tag, x.cr.cmac = setupEAX(c, iv, hdr, tagBytes);
	x.ctr = NewCTRReader(c, ctrIV, &x.cr);
	return x;
}

func (x *eaxDecrypter) checkTag() os.Error {
	x.ctr = nil;	// crash if Read is called again

	finishEAX(x.tag, x.cr.cmac);
	if !same(x.tag, x.cr.tag) {
		e := new(EAXTagError);
		e.Computed = copy(x.tag);
		e.Read = copy(x.cr.tag);
		return e;
	}
	return nil;
}

func (x *eaxDecrypter) Read(p []byte) (n int, err os.Error) {
	n, err = x.ctr.Read(p);
	if n == 0 && err == nil {
		err = x.checkTag()
	}
	return n, err;
}