Plan 9 from Bell Labs’s /usr/web/sources/contrib/lucio/pub/openldap/doc/drafts/draft-ietf-ldapext-ldapv3-dupent-xx.txt

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.




LDAPEXT Working Group                                    J. Sermersheim 
Internet Draft                                              Novell, Inc 
Document: draft-ietf-ldapext-ldapv3-dupent-08.txt             Sept 2002 
Intended Category: Standard Track                                       
 
 
  LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
1. Status of this Memo 
 
   This document is an Internet-Draft and is in full conformance with 
   all provisions of Section 10 of RFC2026 [1].  
    
   Internet-Drafts are working documents of the Internet Engineering 
   Task Force (IETF), its areas, and its working groups. Note that 
   other groups may also distribute working documents as Internet-
   Drafts. Internet-Drafts are draft documents valid for a maximum of 
   six months and may be updated, replaced, or obsoleted by other 
   documents at any time. It is inappropriate to use Internet- Drafts 
   as reference material or to cite them other than as "work in 
   progress."  
    
   The list of current Internet-Drafts can be accessed at 
   http://www.ietf.org/ietf/1id-abstracts.txt  
    
   The list of Internet-Draft Shadow Directories can be accessed at 
   http://www.ietf.org/shadow.html. 
    
2. Abstract 
    
   This document describes a Duplicate Entry Representation control 
   extension for the LDAP Search operation. By using the control with 
   an LDAP search, a client requests that the server return separate 
   entries for each value held in the specified attribute(s). For 
   instance, if a specified attribute of an entry holds multiple 
   values, the search operation will return multiple instances of that 
   entry, each instance holding a separate single value in that 
   attribute. 
    
3. Introduction 
    
   This document describes controls, which allow duplicate entries to 
   be returned in the result set of search operation. Each duplicated 
   entry represents a distinct value (or combination of values) of the 
   set of specified multi-valued attributes. 
    
   For example, an application may need to produce an ordered list of 
   entries, sorted by a multi-valued attribute, where each attribute 
   value is represented in the list. The Server-Side Sorting control 
   [RFC2891] allows the server to order search result entries based on 
   attribute values (sort keys).  But it does not allow one to specify 
   behavior when an attribute contains multiple values.  The default 

 
Sermersheim       Internet-Draft - Expires Mar 2003            Page 1 
LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
   behavior, as outlined in 7.9 of [X.511], is to use the smallest 
   order value as the sort key. 
    
   In order to produce an ordered list, where each value of a multi-
   valued attribute is sorted into the list, a separate control is 
   needed which causes the set of entries to be expanded sufficiently 
   to represent each attribute value prior to sorting. 
    
    
    
   An example of this would be a sorted list of all telephone numbers 
   in an organization.  Because any entry may have multiple telephone 
   numbers, and the list is to be sorted by telephone number, the list 
   must be able to contain duplicate entries, each with its own unique 
   telephone number. 
    
   Another example would be an application that needs to display an 
   ordered list of all members of a group.  It would use this control 
   to create a result set of duplicate groupOfNames entries, each with 
   a single, unique value in its member attribute. 
    
4. Conventions 
    
   The key words "MUST", "MUST NOT", "SHOULD", "SHOULD NOT", and "MAY" 
   used in this document carry the meanings described in [RFC2119]. 
    
   All controlValue data is represented as ASN.1 in this document, and 
   is to be BER encoded as stated in Section 5.1 of [RFC2251]. 
    
5. The Controls 
    
   Support for the controls is advertised by the presence of their OID 
   in the supportedControl attribute of a server's root DSE.  The OID 
   for the request control is "2.16.840.1.113719.1.27.101.1" and the 
   OIDs for the response controls are "2.16.840.1.113719.1.27.101.2" 
   and "2.16.840.1.113719.1.27.101.3". 
    
5.1 Request Control 
    
   This control is included in the searchRequest message as part of the 
   controls field of the LDAPMessage, as defined in Section 4.1.12 of 
   [RFC2251]. 
    
   The controlType is set to "2.16.840.1.113719.1.27.101.1". The 
   criticality MAY be set to either TRUE or FALSE.  The controlValue is 
   defined as the following DuplicateEntryRequest: 
    
   DuplicateEntryRequest ::= SEQUENCE { 
        AttributeDescriptionList, -- from [RFC2251] 
        PartialApplicationAllowed BOOLEAN DEFAULT TRUE } 
         
    
5.1.1 AttributeDescriptionList Semantics 
  
Sermersheim       Internet-Draft - Expires Mar 2003            Page 2 
LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
    
   The AttributeDescriptionList data type is described in 4.1.5 of 
   [RFC2251] and describes a list of zero or more AttributeDescription 
   types as also described in 4.1.5 of [RFC2251]. Both definitions are 
   repeated here for convenience: 
    
        AttributeDescriptionList ::= SEQUENCE OF 
                AttributeDescription 
    
        AttributeDescription ::= LDAPString 
    
   A value of AttributeDescription is based on the following BNF: 
    
        attributeDescription = AttributeType [ ";" <options> ] 
    
   While processing a search request, a server implementation examines 
   this list. If a specified attribute or attribute subtype exists in 
   an entry to be returned by the search operation, and that attribute 
   holds multiple values, the server treats the entry as if it were 
   multiple, duplicate entries -- the specified attributes each holding 
   a single, unique value from the original set of values of that 
   attribute. Note that this may result in search result entries that 
   no longer match the search filter. 
    
   Specifying an attribute supertype has the effect of treating all 
   values of that attribute's subtypes as if they were values of the 
   specified attribute supertype. See Section 6.2 for an example of 
   this. 
    
   When attribute descriptions contain subtyping options, they are 
   treated in the same manner as is described in Section 4.1.5 of 
   [RFC2251]. Semantics are undefined if an attribute description 
   contains a non-subtyping option, and SHOULD NOT be specified by 
   clients. 
    
   When two or more attributes are specified by this control, the 
   number of duplicate entries is the combination of all values in each 
   attribute. Because of the potential complexity involved in servicing 
   multiple attributes, server implementations MAY choose to support a 
   limited number of attributes in the control. 
    
   There is a special case where either no attributes are specified, or 
   an attribute description value of "*" is specified.  In this case, 
   all attributes are used.  (The "*" allows the client to request all 
   user attributes in addition to specific operational attributes). 
    
   If an attribute is unrecognized, that attribute is ignored when 
   processing the control. 
    
5.1.2 PartialApplicationAllowed Semantics 
    
   The PartialApplicationAllowed field is used to specify whether the 
   client will allow the server to apply this control to a subset of 
  
Sermersheim       Internet-Draft - Expires Mar 2003            Page 3 
LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
   the search result set. If TRUE, the server is free to arbitrarily 
   apply this control to no, any, or all search results. If FALSE, the 
   server MUST either apply the control to all search results or fail 
   to support the control at all. 
    
   Client implementations use the DuplicateSearchResult control to 
   discover which search results have been affected by this control. 
    
5.2 Response Controls 
    
   Two response controls are defined to provide feedback while the 
   search results are being processed; DuplicateSearchResult and 
   DuplicateEntryResponseDone.  
    
   The DuplicateSearchResult control is sent with all SearchResultEntry 
   operations that contain search results which have been modified by 
   the DuplicateEntryRequest control. 
    
   The DuplicateEntryResponseDone control is sent with the 
   SearchResultDone operation in order to convey completion 
   information.  
    
5.2.1 The DuplicateSearchResult control 
    
   This control is included in the SearchResultEntry message of any 
   search result that holds an entry that has been modified by the 
   DuplicateEntryRequest control as part of the controls field of the 
   LDAPMessage, as defined in Section 4.1.12 of [RFC2251]. This control 
   is absent on search results that are unaffected by 
   DuplicateEntryRequest control. 
    
   The controlType is set to "2.16.840.1.113719.1.27.101.2". The 
   controlValue is not included. 
    
5.2.2 The DuplicateEntryResponseDone control 
    
   This control is included in the searchResultDone message as part of 
   the controls field of the LDAPMessage, as defined in Section 4.1.12 
   of [RFC2251]. 
    
   The controlType is set to "2.16.840.1.113719.1.27.101.3". The 
   controlValue is defined as the following DuplicateEntryResponseDone: 
    
      DuplicateEntryResponseDone ::= SEQUENCE { 
         resultCode,     -- From [RFC2251] 
         errorMessage    [0] LDAPString OPTIONAL, 
         attribute       [1] AttributeDescription OPTIONAL } 
    
   A resultCode field is provided here to allow the server to convey to 
   the client that an error resulted due to the control being serviced. 
   For example, a search that would ordinarily complete successfully 
   may fail with a sizeLimitExceeded error due to this control being 

  
Sermersheim       Internet-Draft - Expires Mar 2003            Page 4 
LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
   processed. If the operation is successfull, the value will be 
   success (0). 
 
   The errorMessage field MAY be populated with a human-readable string 
   in the event of an erroneous result code. 
    
   The attribute field MAY be set to the value of the first attribute 
   specified by the DuplicateEntryRequest that was in error.  The 
   client MUST ignore the attribute field if the result is success. 
 
6. Protocol Examples 
    
6.1 Simple example 
    
   This example will show this control being used to produce a list of 
   all telephone numbers in the dc=example,dc=net container.  Let's say 
   the following three entries exist in this container; 
    
   dn: cn=User1,dc=example,dc=net 
   telephoneNumber: 555-0123 
    
   dn: cn=User2,dc=example,dc=net 
   telephoneNumber: 555-8854 
   telephoneNumber: 555-4588 
   telephoneNumber: 555-5884 
    
   dn: cn=User3,dc=example,dc=net 
   telephoneNumber: 555-9425 
   telephoneNumber: 555-7992 
    
   First an LDAP search is specified with a baseDN of 
   "dc=example,dc=net", subtree scope, filter set to 
   "(telephoneNumber=*)".  A DuplicateEntryRequest control is attached 
   to the search, specifying "telephoneNumber" as the attribute 
   description, and the search request is sent to the server. 
    
   The set of search results returned by the server would then consist 
   of the following entries: 
    
   dn: cn=User1,dc=example,dc=net 
   telephoneNumber: 555-0123 
   <no DuplicateSearchResult control sent with search result> 
    
   dn: cn=User2,dc=example,dc=net 
   telephoneNumber: 555-8854 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User2,dc=example,dc=net 
   telephoneNumber: 555-4588 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User2,dc=example,dc=net 
   telephoneNumber: 555-5884 
  
Sermersheim       Internet-Draft - Expires Mar 2003            Page 5 
LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User3,dc=example,dc=net 
   telephoneNumber: 555-9425 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User3,dc=example,dc=net 
   telephoneNumber: 555-7992 
   control: 2.16.840.1.113719.1.27.101.2 
    
   All but the first entry are accompanied by the DuplicateSearchResult 
   control when sent from the server. 
    
   Note that it is not necessary to use an attribute in this control 
   that is specified in the search filter.  This example only does so, 
   because the result was to obtain a list of telephone numbers. 
    
6.2 Specifying multiple attributes 
    
   A more complicated example involving multiple attributes will result 
   in more entries. If we assume these entries in the directory: 
    
   dn: cn=User1,dc=example,dc=net 
   cn: User1 
   givenName: User One 
   mail: user1@example.net 
    
   dn: cn=User2,dc=example,dc=net 
   cn: User2 
   givenName: User Two 
   mail: user2@example.net  
   mail: usertwo@example.net 
    
   In this example, we specify mail and name in the attribute list. By 
   specifying name, all attribute subtypes of name will also be 
   considered. Following is the resulting set of entries: 
    
   dn: cn=User1,dc=example,dc=net 
   cn: User1 
   mail: user1@example.net 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User1,dc=example,dc=net 
   givenName: User One 
   mail: user1@example.net 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User2,dc=example,dc=net 
   cn: User2 
   mail: user2@example.net  
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User2,dc=example,dc=net 
  
Sermersheim       Internet-Draft - Expires Mar 2003            Page 6 
LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
   cn: User2 
   mail: usertwo@example.net  
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User2,dc=example,dc=net 
   givenName: User Two 
   mail: user2@example.net  
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=User2,dc=example,dc=net 
   givenName: User Two 
   mail: usertwo@example.net 
   control: 2.16.840.1.113719.1.27.101.2 
 
6.3 Listing the members of a groupOfNames 
    
   This example shows how the controls can be used to turn a single 
   groupOfNames entry into multiple duplicate entries.  Let's say this 
   is our groupOfNames entry: 
    
   dn: cn=Administrators,dc=example,dc=net 
   cn: Administrators 
   member: cn=aBaker,dc=example,dc=net 
   member: cn=cDavis,dc=example,dc=net 
   member: cn=bChilds,dc=example,dc=net 
   member: cn=dEvans,dc=example,dc=net 
    
   We could set our search base to "cn=Administrators,dc=example,dc=net 
   ", filter to "(objectClass=*)", use an object scope (to restrict it 
   to this entry) and send the duplicateEntryRequest control with 
   "member" as its attribute value.  The resulting set would look like 
   this: 
    
   dn: cn=Administrators,dc=example,dc=net 
   member: cn=aBaker,dc=example,dc=net 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=Administrators,dc=example,dc=net 
   member: cn=cDavis,dc=example,dc=net 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=Administrators,dc=example,dc=net  
   member: cn=bChilds,dc=example,dc=net 
   control: 2.16.840.1.113719.1.27.101.2 
    
   dn: cn=Administrators,dc=example,dc=net 
   member: cn=dEvans,dc=example,dc=net 
   control: 2.16.840.1.113719.1.27.101.2 
    
   This list can then be sorted by member and displayed (also by 
   member) in a list. 
    
7. Relationship to other controls 
  
Sermersheim       Internet-Draft - Expires Mar 2003            Page 7 
LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
    
   This control is intended (but not limited) to be used with the 
   Server Side Sorting control [RFC2891].  By pairing this control with 
   the Server Side Sorting control, One can produce a set of entries, 
   sorted by attribute values, where each attribute value is 
   represented in the sorted set.  Server implementations MUST ensure 
   that this control is processed before sorting the result of a 
   search, as this control alters the result set of search. 
    
   This control MAY also be used with the Virtual List View [VLV] 
   control (which has a dependency on the Server Side Sort control). 
   The nature of the dependency between the VLV control and the Sort 
   control is such that the Sorting takes place first. Because the sort 
   happens first, and because this control is processed before the sort 
   control, the impact of this control on the VLV control is minimal. 
   Some server implementations may need to carefully consider how to 
   handle the typedown functionality of the VLV control when paired 
   with this control. The details of this are heavily implementation 
   dependent and are beyond the scope of this document. 
    
8. Notes for Implementers 
    
   Both client and server implementations MUST be aware that using this 
   control could potentially result in a very large set of search 
   results. Servers MAY return an adminLimitExceeded result in the 
   response control due to inordinate consumption of resources. This 
   may be due to some a priori knowledge such as a server restriction 
   of the number of attributes in the request control that it's willing 
   to service, or it may be due to the server attempting to service the 
   control and running out of resources. 
    
   Client implementations MUST be aware that when using this control, 
   search entries returned will contain a subset of the values of any 
   specified attribute. 
    
   If this control is used in a chained environment, servers SHOULD NOT 
   pass this control to other servers. Instead they SHOULD gather 
   results and apply this control themselves. 
    
9. Security Considerations 
    
   This control allows finer control of the result set returned by an 
   LDAP search operation and as such may be used in a denial of service 
   attack. See Section 8 for more information on how this is detected 
   and handled. 
    
10. Acknowledgments 
    
   The author gratefully thanks the input and support of participants 
   of the LDAP-EXT working group. 
    
11. References 
    
  
Sermersheim       Internet-Draft - Expires Mar 2003            Page 8 
LDAP Control for a Duplicate Entry Representation of Search Results 
 
 
   [RFC2251] 
   Wahl, M, S. Kille and T. Howes, "Lightweight Directory Access 
   Protocol (v3)", Internet RFC, December, 1997.  
   Available as RFC 2251. 
    
   [RFC2891] 
   Wahl, M, A. Herron and T. Howes, "LDAP Control Extension for Server 
   Side Sorting of Search Results", Internet RFC, August, 2000. 
   Available as RFC 2891. 
    
   [VLV] 
   Boreham, D, Sermersheim, J, Anantha, A, Armijo, M, "LDAP Extensions 
   for Scrolling View Browsing of Search Results", Internet Draft, 
   April, 2000. 
   Available as draft-ietf-ldapext-ldapv3-vlv-xx.txt. 
    
   [X.511] 
   ITU-T Rec. X.511, "The Directory: Abstract Service Definition", 
   1993. 
    
   [RFC2119] 
   Bradner, Scott, "Key Words for use in RFCs to Indicate Requirement 
   Levels", Internet Draft, March, 1997.  
   Available as RFC 2119. 
    
12. Author's Address 
    
   Jim Sermersheim 
   Novell, Inc. 
   1800 South Novell Place 
   Provo, Utah 84606, USA 
   jimse@novell.com 
   +1 801 861-3088 
 
    


















  
Sermersheim       Internet-Draft - Expires Mar 2003            Page 9 

Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to webmaster@9p.io.