Plan 9 from Bell Labs’s /usr/web/sources/contrib/pac/sys/doc/netpbm/ms/jpeg2ktopam.ms

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.


.TL
Jpeg2ktopam User Manual
.SH 1
Jpeg2ktopam
.LP
Updated: 27 October 2002
.br
Table Of Contents
.SH 2
NAME
.LP
jpeg2ktopam - convert JPEG-2000 code stream to PAM/PNM
.SH 2
SYNOPSIS
.LP
\fBjpeg2ktopam\fR
[\fB-verbose\fR]
[\fB-debuglevel=\fR\fInumber\fR]
\fIfilename\fR
<?makeman .SH OPTION USAGE ?>
.LP
Minimum unique abbreviation of option is acceptable.  You may use double
hyphens instead of single hyphen to denote options.  You may use white
space in place of the equals sign to separate an option name from its value.
.SH 2
DESCRIPTION
.LP
.LP
This program is part of Netpbm.
.LP
\fBjpeg2ktopam\fR converts the named JPEG-2000 code stream file,
or Standard Input if no file is named, to a PBM, PGM, PPM, or PAM
file on Standard Output.
.LP
The JPEG-2000 specification specifies two different formats: JP2
and JPEG-2000 code stream (JPC).  JP2 represents a visual image quite
specifically, whereas JPC is a more or less arbitrary array of
codes.  JP2 images are a subset of JPC images.  \fBjpeg2ktopam\fR
converts any JPC image.  If the color space identified in the image is
grayscale (JAS_IMAGE_CS_GRAY), \fBjpeg2ktopam\fR generates a PGM
image, unless the image contains only one bit per pixel, in which case
\fBjpeg2ktopam\fR generates PBM.  If the color space is RGB
(JAS_IMAGE_CS_RGB), \fBjpeg2ktopam\fR generates a PPM image.  If the
input image is anything else, \fBjpeg2ktopam\fR generates a PAM image
with no tuple type identified.
.LP
In the PGM and PPM cases, \fBjpeg2ktopam\fR assumes the intensity
values in the input image have the same meaning as for PGM and PPM.
One thing that implies is the ITU-R Recommendation BT.709 color space,
which means the assumption is false for JP2 input.  JP2 input uses
SRGB color encoding.  So if you use \fBjpeg2ktopam\fR to convert a
JP2 image to PPM, it changes the visual image (slightly) -- the colors
in the output are not the same as in the input.
.LP
In the PAM image, the output samples are numerically identical to
the input samples.  If the input samples are signed, they are
represented in two's complement form in the output (because PAM
samples are always unsigned).  The PAM plane numbers are identical to
the JPC component numbers.
.LP
A JPC image has a "precision," which is the number of bits used for
each code (in Netpbm lingo, "sample").  Actually, each component has a
separate precision.  The maxval of a PGM, PPM, or PAM output is the
largest number you can represent in the JPC precision of the JPC
component with the greatest precision.  The samples in all components are
scaled to that maxval.  So if the red component has a precision of 4 bits
and the green component has a precision of 6 bits, the maxval is 63 and
the red component codes from the JPC image are multiplied by 63/15 to
generate the output samples.
.LP
\fBjpeg2ktopam\fR interprets the JPC input with the Jasper JPEG-2000
library.  See documentation of the library for details on what
\fBjpeg2ktopam\fR handles.  Note that the Jasper library contains
facilities for writing PNM images, but \fBjpeg2ktopam\fR does not use
those.  It uses the Netpbm library instead.  Note that the makers of
the Jasper library write it "JasPer," but Netpbm documentation follows
standard American English typography rules, which don't allow that
kind of capitalization.
.LP
Use \fBpamtojpeg2k\fR to convert in the other direction.
.LP
The program \fBjasper\fR, which is packaged with the Jasper 
JPEG-2000 library, also converts between JPEG-2000 and PNM formats.
Because it's packaged with the library, it may exploit it better, 
especially recently added features.  However, since it does not use the
Netpbm library to read and write the Netpbm formats, it doesn't do as
good a job on that side.
.SH 2
OPTIONS
.LP
.RS
.IP "\fB-verbose\fR"
This option causes \fBjpeg2ktopam\fR to issue informational
messages about the conversion process.
.IP "\fB-debuglevel\fR=\fInumber\fR"
This option controls debug messages from the Jasper library.  
\fBjpeg2ktopam\fR passes \fInumber\fR as the debug level to the Jasper
JPC decoder.
.RE
.SH 2
EXAMPLES
.LP
.DS L
  jpeg2ktopam myimg.jpc >myimg.ppm
.DE
.SH 2
ABOUT JPEG-2000
.LP
.LP
See the \fBpamtojpeg2k\fR manual
for general information on JPEG-2000 compression and the
JPEG-2000 formats.
.SH 2
SEE ALSO
.LP
\fBjpctopam\fR,
\fBpnmtopeg\fR,
\fBppm\fR,
\fBpgm\fR,
\fBpbm\fR,
\fBpam\fR,
.SH 2
History
.LP
.LP
\fBjpeg2ktopam\fR was added to Netpbm in Release 10.12 (November 2002).
.br
\l'5i'
.SH 2
Table Of Contents
.LP
.IP \(bu
SYNOPSIS
.IP \(bu
DESCRIPTION
.IP \(bu
OPTIONS
.IP \(bu
EXAMPLES
.IP \(bu
SEE ALSO
.LP

Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to webmaster@9p.io.