\errorcontextlines9
\documentclass[twoside]{article}
%\usepackage[]{t1enc}
\usepackage{rotating}
\usepackage{epsfig}
\usepackage{example}
%-------------------------------------------------------
\def\degrees{{\small$^{\mathrm{o}}$}}
%-------------------------------------------------------
\begin{document}
\title{Test of `rotating' package}
\author{Sebastian Rahtz and Leonor Barroca}
\date{November 19th 1994}
\maketitle
`Rotating' provides a generalised rotation environment, where the text
will be rotated (anti-clockwise) by the number of degrees specified as
a parameter to the environment, but no special arrangement is made to
find space for the result.
\begin{example}
Start here
\begin{rotate}{-56}
Save whales
\end{rotate}
End here
\end{example}
A complete example of rotating text without leaving space
would the `Save the whale' text
written at 10 degree intervals round the compass. We use
`rlap' to ensure that all the texts are printed at the same point.
Just to show that \TeX\ can handle PostScript muckings-about
properly\ldots
\begin{example}
\newcount\wang
\newsavebox{\wangtext}
\newdimen\wangspace
\def\wheel#1{\savebox{\wangtext}{#1}%
\wangspace\wd\wangtext
\advance\wangspace by 1cm%
\centerline{%
\rule{0pt}{\wangspace}%
\rule[-\wangspace]{0pt}{\wangspace}%
\wang=-180\loop\ifnum\wang<180
\rlap{\begin{rotate}{\the\wang}%
\rule{1cm}{0pt}#1\end{rotate}}%
\advance\wang by 10\repeat}}
\wheel{Save the whale}
\end{example}
If the user
desires \LaTeX\ to leave space for the rotated box, then `turn' is used:
\begin{example}
Start here \begin{turn}{56}%
Save the whale
\end{turn} end here
\end{example}
The environment `Sideways' is a special case, setting the rotation to $-90$,
and leaving the correct space for the rotated box.
\begin{example}
Start here
\begin{sideways}%
Save the whale
\end{sideways}
End here
\end{example}
If you deal with whole paragraphs of text, you realize that \TeX\
boxes are not as simple as they sometimes look: they have a height
{\em and} a depth. So when you rotate, you rotate about the point on
the left-hand edge of the box that meets the baseline. The results can
be unexpected, as shown in the full set of paragraph rotations in
Figures \ref{angles1} and \ref{angles2}. If you really want to turn a
paragraph so that it appears to rotate about the {\em real} bottom of
the \TeX\ box,
you have to adjust the box in the normal \LaTeX\ way:
\begin{example}
\newsavebox{\foo}
\savebox{\foo}{\parbox{1in}{Save
the whales Save the whale
Save the whale
Save the whale}}%
Start
\begin{turn}{45}\usebox{\foo}\end{turn}
End
\end{example}
\begin{example}
\savebox{\foo}{\parbox[b]{1in}{Save
the whales Save the whale
Save the whale
Save the whale}}%
Start
\begin{turn}{45}\usebox{\foo}\end{turn}
End
\end{example}
\def\testrot#1{%
\savebox{\foo}{\parbox{1in}{Save
the whales Save the whale Save the whale Save the whale}}%
\framebox{---\begin{turn}{#1}\framebox{\usebox{\foo}}\end{turn}---}}%
\begin{figure*}
\begin{tabular}{|c|c|c|}
\hline
\testrot{0} &\testrot{-40}&\testrot{-80}\\
0\degrees & -40\degrees & -80\degrees \\
\hline
\testrot{-120}&\testrot{-160}&\testrot{-200}\\
120\degrees & -160\degrees & -200\degrees \\
\hline
\testrot{-240}&\testrot{-280}&\testrot{-320}\\
-240\degrees & -280\degrees & -320\degrees \\
\hline
\end{tabular}
\caption{Rotation of paragraphs between 0 and -320 degrees \label{angles1}}
\end{figure*}
\begin{figure*}
\begin{tabular}{|c|c|c|}
\hline
\testrot{-180} &\testrot{40}&\testrot{80}\\
-180\degrees & 40\degrees & 80\degrees \\
\hline
\testrot{120}&\testrot{160}&\testrot{200}\\
120\degrees & 160\degrees & 200\degrees \\
\hline
\testrot{240}&\testrot{280}&\testrot{320}\\
240\degrees & 280\degrees & 320\degrees \\
\hline
\end{tabular}
\caption{Rotation of paragraphs between 0 and 320 degrees\label{angles2}}
\end{figure*}
We can set tabular material in this way; at the same time, we
demonstrate that the rotation can be nested:
\begin{example}
\begin{sideways}
\rule{1in}{0pt}
\begin{tabular}{|lr|}
\em Word & \begin{rotate}{90}%
Occurrences\end{rotate}
\\
\hline
hello & 33\\
goodbye & 34\\
\hline
\end{tabular}
\end{sideways}
\end{example}
\begin{example}
\begin{quote}
\rule{0pt}{1.5in}\begin{tabular}{rrr}
\begin{rotate}{45}Column 1\end{rotate}&
\begin{rotate}{45}Column 2\end{rotate}&
\begin{rotate}{45}Column 3\end{rotate}\\
\hline
1& 2& 3\\
4& 5& 6\\
7& 8& 9\\
\hline
\end{tabular}
\end{quote}
\end{example}
\begin{example}
\begin{quote}
\begin{tabular}{rrr}
\begin{turn}{45}Column 1\end{turn}&
\begin{turn}{45}Column 2\end{turn}&
\begin{turn}{45}Column 3\end{turn}\\
\hline
1& 2& 3\\
4& 5& 6\\
7& 8& 9\\
\hline
\end{tabular}
\end{quote}
\end{example}
\begin{example}
\begin{quote}
\rule{0pt}{1.5in}\begin{tabular}{rrr}
\begin{rotate}{45}Column 1\end{rotate}
\rule{.5cm}{0pt}&
\begin{rotate}{45}Column 2\end{rotate}
\rule{.5cm}{0pt}&
\begin{rotate}{45}Column 3\end{rotate}
\rule{.5cm}{0pt}\\
\hline
1& 2& 3\\
4& 5& 6\\
7& 8& 9\\
\hline
\end{tabular}
\end{quote}
\end{example}
\begin{example}
\begin{sideways}
\begin{tabular}{|l|c|c|c|c|c|p{1in}|}
\hline
&&\multicolumn{4}{c}{NUMBER OF SITES}\vline &ACCEPT or\\
\cline{3-6} &STUDY AREA&&\multicolumn{3}{c}{%
IN BOUNDARY ZONE}\vline&REJECT\\
\cline{4-6}&&&&\multicolumn{2}{c}{EXPECTED}
\vline&NULL\\
\cline{5-6}&&TOT&OBS&FROM&TO&HYPOTH\\
\cline{2-7}
&FULL SAMPLE&41&31&10.3&27.0&REJECT\\
&SAMPLE AREA 1&23&16&4.3&16.7&ACCEPT\\
&SAMPLE AREA 2&18&15&2.8&13.7&REJECT\\
&RUSHEN&13&9&1.2&10.4&ACCEPT\\
&ARBORY&10&7&0.6&8.8&ACCEPT\\
&MAROWN&10&8&0.4&8.6&ACCEPT\\
\rule{0.5cm}{0pt}
\begin{rotate}{90}PRIMARY UNITS%
\end{rotate}\rule{0.5cm}{0pt}
&SANTON&8&7&0.0&7.3&ACCEPT\\
\hline
\end{tabular}
\end{sideways}
\end{example}
If you are interested in setting rotated material in tables or
figures, this presents no problem. Figure \ref{fig1} shows how
PostScript files which are being incorporated using `epsfig' can be
rotated at will, while Figure \ref{fig2} shows, in contrast, how
`epsfig' itself handles rotation. It is also possible to rotate the
whole of the figure environment, including caption,
by using the `sidewaysfigure' ands `sidewaystable' environments
in place of `figure' and `table'.
Sideways figures and tables always take up the whole page. They can be
rotated so that the bottom ot the figures is on the left or the right;
the default is to always turn to the right. If the `twoside' option
has been given to the main document class, this package then starts
rotating sideways figures according to the page number (this requires
two passes through \LaTeX{} at least). If you want the `twoside'
option, but want the figures always in one direction, use the
`figuresright' or `riguresleft' options to `rotating'.
The code used to produce figures
\ref{rotfloat1}--\ref{rotfloat4} is as follows:
\begin{description}
\item[Figure \ref{rotfloat1}]
{\small\begin{verbatim}
\begin{sidewaystable}
\centering
\caption{This is a narrow table, which should be centred vertically
on the final page.\label{rotfloat1}}
\begin{tabular}{|ll|}
\hline
a & b \\
c & d \\
e & f \\
g & h \\
i & j \\
\hline
\end{tabular}
\end{sidewaystable}
\end{verbatim}
}
\item[Figure \ref{rotfloat2}]
{\scriptsize\begin{verbatim}
\begin{sidewaystable}
\centering
\begin{tabular}{|llllllllp{1in}lp{1in}|}
\hline
Context &Length &Breadth/ &Depth &Profile &Pottery &Flint &Animal &Stone &Other &C14 Dates \\
& &Diameter & & & & &
Bones&&&\\
\hline
&&&&&&&&&&\\
\multicolumn{10}{|l}{\bf Grooved Ware}&\\
784 &--- &0.9m &0.18m &Sloping U &P1 &$\times$46 & $\times$8 && $\times$2 bone& 2150$\pm$ 100 BC\\
785 &--- &1.00m &0.12 &Sloping U &P2--4 &$\times$23 & $\times$21 & Hammerstone &---&---\\
962 &--- &1.37m &0.20m &Sloping U &P5--6 &$\times$48 & $\times$57* & ---& ---&1990 $\pm$ 80 BC (Layer 4) 1870 $\pm$90 BC (Layer 1)\\
983 &0.83m &0.73m &0.25m &Stepped U &--- &$\times$18 & $\times$8 & ---& Fired clay&---\\
&&&&&&&&&&\\
\multicolumn{10}{|l}{\bf Beaker}&\\
552 &--- &0.68m &0.12m &Saucer &P7--14 &--- & --- & --- &--- &---\\
790 &--- &0.60m &0.25m &U &P15 &$\times$12 & --- & Quartzite-lump&--- &---\\
794 &2.89m &0.75m &0.25m &Irreg. &P16 &$\times$3 & --- & --- &--- &---\\
\hline
\end{tabular}
\caption[Grooved Ware and Beaker Features, their Finds and
Radiocarbon Dates]{Grooved Ware and Beaker Features, their
Finds and Radiocarbon Dates; For a breakdown of the Pottery
Assemblages see Tables I and III; for
the Flints see Tables II and IV; for the
Animal Bones see Table V.}\label{rotfloat2}
\end{sidewaystable}
\end{verbatim}
}
\item[Figure \ref{rotfloat3}]
{\small\begin{verbatim}
\begin{table}
\centering
\rotcaption{Minimum number of individuals; effect of rotating table
and caption separately}\label{rotfloat3}%
\begin{sideways}
\begin{tabular}[b]{cccccccccp{1cm}}
\hline
Phase&Total&Cattle&Sheep&Pig&Red Deer&Horse&Dog&Goat&Other\\
\hline
&1121&54&12&32&1&1&1&1&1 polecat\\
3&8255&58&6&35&1&1&1&1&1 roe deer, 1 hare, 1 cat, 1 otter\\
4&543&45&6&45&4&1&1&---&---\\
\hline
&9919&157&24&112&6&3&3&2&5\\
\hline
\end{tabular}
\end{sideways}
\end{table}
\end{verbatim}
}
\item[Figure \ref{rotfloat4}]
{\small\begin{verbatim}
\begin{sidewaysfigure}
\centerline{\epsfig{figure=cat.eps,width=.8\textheight,height=.4\textwidth}}
\caption{A pathetically squashed rotated pussycat}\label{rotfloat4}
\end{sidewaysfigure}
\end{verbatim}
}
\end{description}
\begin{figure}
\begin{example}
---\begin{turn}{156}
\epsfig{figure=cat.eps,width=1in}
\end{turn}---
\end{example}
\begin{example}
---\begin{sideways}
\epsfig{figure=cat.eps,width=1in}
\end{sideways}---
\end{example}
\begin{example}
---\epsfig{figure=cat.eps,width=1in}---
\end{example}
\caption{A normal, and sideways, pictures within a figure\label{fig1}}
\end{figure}
\begin{figure}
\begin{example}
\epsfig{figure=cat.eps,width=1in,%
angle=-56}
\end{example}
\caption{Figures rotated with `epsfig'\label{fig2}}
\end{figure}
\begin{sidewaystable}
\centering
\caption{This is a narrow table, which should be centred vertically
on the final page.\label{rotfloat1}}
\begin{tabular}{|ll|}
\hline
a & b \\
c & d \\
e & f \\
g & h \\
i & j \\
\hline
\end{tabular}
\end{sidewaystable}
\begin{sidewaystable}
\centering
\begin{tabular}{|llllllllp{1in}lp{1in}|}
\hline
Context &Length &Breadth/ &Depth &Profile &Pottery &Flint &Animal &Stone &Other &C14 Dates \\
& &Diameter & & & & &
Bones&&&\\
\hline
&&&&&&&&&&\\
\multicolumn{10}{|l}{\bf Grooved Ware}&\\
784 &--- &0.9m &0.18m &Sloping U &P1 &$\times$46 & $\times$8 && $\times$2 bone& 2150$\pm$ 100 BC\\
785 &--- &1.00m &0.12 &Sloping U &P2--4 &$\times$23 & $\times$21 & Hammerstone &---&---\\
962 &--- &1.37m &0.20m &Sloping U &P5--6 &$\times$48 & $\times$57* & ---& ---&1990 $\pm$ 80 BC (Layer 4) 1870 $\pm$90 BC (Layer 1)\\
983 &0.83m &0.73m &0.25m &Stepped U &--- &$\times$18 & $\times$8 & ---& Fired clay&---\\
&&&&&&&&&&\\
\multicolumn{10}{|l}{\bf Beaker}&\\
552 &--- &0.68m &0.12m &Saucer &P7--14 &--- & --- & --- &--- &---\\
790 &--- &0.60m &0.25m &U &P15 &$\times$12 & --- & Quartzite-lump&--- &---\\
794 &2.89m &0.75m &0.25m &Irreg. &P16 &$\times$3 & --- & --- &--- &---\\
\hline
\end{tabular}
\caption[Grooved Ware and Beaker Features, their Finds and
Radiocarbon Dates]{Grooved Ware and Beaker Features, their
Finds and Radiocarbon Dates; For a breakdown of the Pottery
Assemblages see Tables I and III; for
the Flints see Tables II and IV; for the
Animal Bones see Table V.}\label{rotfloat2}
\end{sidewaystable}
\begin{table}
\centering
\hbox{
\rotcaption{Minimum number of individuals; effect of rotating table
and caption separately}\label{rotfloat3}%
\begin{sideways}
\begin{tabular}[t]{cccccccccp{1cm}}
\hline
Phase&Total&Cattle&Sheep&Pig&Red Deer&Horse&Dog&Goat&Other\\
\hline
&1121&54&12&32&1&1&1&1&1 polecat\\
3&8255&58&6&35&1&1&1&1&1 roe deer, 1 hare, 1 cat, 1 otter\\
4&543&45&6&45&4&1&1&---&---\\
\hline
&9919&157&24&112&6&3&3&2&5\\
\hline
\end{tabular}
\end{sideways}
}
\end{table}
\begin{sidewaysfigure}
\centerline{\epsfig{figure=cat.eps,width=.8\textheight,height=.4\textwidth}}
\caption{A pathetically squashed rotated pussycat (1)}
\end{sidewaysfigure}
\begin{sidewaysfigure}
\centerline{\epsfig{figure=cat.eps,width=.8\textheight,height=.4\textwidth}}
\caption{A pathetically squashed rotated pussycat (2)}
\end{sidewaysfigure}
\begin{sidewaysfigure}
\centerline{\epsfig{figure=cat.eps,width=.8\textheight,height=.4\textwidth}}
\caption{A pathetically squashed rotated pussycat (3)}
\end{sidewaysfigure}
\begin{sidewaysfigure}
\centerline{\epsfig{figure=cat.eps,width=.8\textheight,height=.4\textwidth}}
\caption{A pathetically squashed rotated pussycat (4)}
\end{sidewaysfigure}
\begin{sidewaysfigure}
\centerline{\epsfig{figure=cat.eps,width=.8\textheight,height=.4\textwidth}}
\caption{A pathetically squashed rotated pussycat}\label{rotfloat4}
\end{sidewaysfigure}
\end{document}
|
