% \iffalse meta-comment
%
% Copyright 1993 1994 1995 1996 1997 1998 1999
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file.
%
% This file is part of the LaTeX2e system.
% ----------------------------------------
%
% It may be distributed under the terms of the LaTeX Project Public
% License, as described in lppl.txt in the base LaTeX distribution.
% Either version 1.0 or, at your option, any later version.
%
% \fi
% testpage.tex - created 21 January 1994.
% Copyright (C) 1994 by Rainer Schoepf
%
% Test of how accurately printer reproduces dimensions specified
% by LaTeX output.
\typeout{}
\typeout{*****************************************************}
\typeout{* Type paper type in form of document class option,}
\typeout{* e.g., `a4paper' or `letterpaper' (without the quotes).}
\typein[\papertype]{*************************************%
**************}
\typeout{}
\typeout{*****************************************************}
\typeout{* Do you want to produce two test pages for use with}
\typeout{* a double sided printer? (y/n)}
\typein[\doublesided]{*************************************%
**************}
\documentclass[\papertype]{article}
\usepackage{ifthen}
\pagestyle{empty}
\nofiles
\setlength{\oddsidemargin}{0pt}
\setlength{\evensidemargin}{0pt}
\setlength{\marginparwidth}{1in}
\setlength{\marginparsep}{0pt}
\setlength{\topmargin}{0pt}
\setlength{\headheight}{0pt}
\setlength{\headsep}{0pt}
\setlength{\topskip}{0pt}
\setlength{\footskip}{0pt}
\setlength{\textwidth}{\paperwidth}
\addtolength{\textwidth}{-2in}
\setlength{\textheight}{\paperheight}
\addtolength{\textheight}{-2in}
\setlength{\parindent}{0pt}
\setlength{\unitlength}{1sp}
\newcounter{textheight}
\newcounter{textwidth}
\setcounter{textheight}{\textheight}
\setcounter{textwidth}{\textwidth}
\newlength{\help}
\newcounter{help}
\newcommand{\sethelpcounter}[2]{%
\setlength{\help}{#2}\setcounter{#1}{\help}}
\newcounter{in}
\newcounter{halfin}
\newcounter{fifthin}
\newcounter{tenthin}
\newcounter{twtin}
\setlength{\help}{1in}
\setcounter{in}{\help}
\setlength{\help}{0.5in}
\setcounter{halfin}{\help}
\setlength{\help}{0.2in}
\setcounter{fifthin}{\help}
\setlength{\help}{0.1in}
\setcounter{tenthin}{\help}
\setlength{\help}{0.05in}
\setcounter{twtin}{\help}
\newcounter{mm}
\newcounter{tmm}
\newcounter{frmm}
\newcounter{fvmm}
\newcounter{tenmm}
\setlength{\help}{1mm}
\setcounter{mm}{\help}
\setlength{\help}{2mm}
\setcounter{tmm}{\help}
\setlength{\help}{4mm}
\setcounter{frmm}{\help}
\setlength{\help}{5mm}
\setcounter{fvmm}{\help}
\setlength{\help}{10mm}
\setcounter{tenmm}{\help}
\newcounter{foo}
\newcounter{x}
\newcounter{y}
\newcommand{\addtox}{\addtocounter{x}}
\newcommand{\addtoy}{\addtocounter{y}}
\newcommand{\putxy}{\put(\value{x},\value{y})}
\newcommand{\multiputxy}{\multiput(\value{x},\value{y})}
\begin{document}
\begin{picture}(0,0)
\scriptsize
\put(0,-\value{textheight}){%
\framebox(\value{textwidth},\value{textheight}){}}
% left mm ruler
\setcounter{x}{0}
\sethelpcounter{y}{-0.45\textheight}
\putxy{\line(-1,0){\value{in}}}
\addtox{-\value{fvmm}}
\addtoy{-\value{tmm}}
\multiputxy(-\value{fvmm},0){5}{\line(0,1){\value{frmm}}}
\addtoy{\value{mm}}
\multiput(-\value{mm},\value{y})(-\value{mm},0){25}%
{\line(0,1){\value{tmm}}}
\addtoy{\value{frmm}}
\setcounter{foo}{1}
\multiput(-\value{tenmm},\value{y})(-\value{tenmm},0){2}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% left in ruler
\setcounter{x}{0}
\sethelpcounter{y}{-0.55\textheight}
\putxy{\line(-1,0){\value{in}}}
\addtox{-\value{tenthin}}
\addtoy{-\value{tenthin}}
\multiputxy(-\value{tenthin},0){10}{\line(0,1){\value{fifthin}}}
\addtox{\value{twtin}}
\addtoy{\value{twtin}}
\multiputxy(-\value{tenthin},0){10}{\line(0,1){\value{tenthin}}}
\setcounter{foo}{1}
\addtox{-\value{twtin}}
\addtoy{\value{tenthin}}
\addtoy{\value{tenthin}}
\multiputxy(-\value{tenthin},0){9}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% right mm ruler
\sethelpcounter{x}{\textwidth}
\sethelpcounter{y}{-0.45\textheight}
\putxy{\line(1,0){\value{in}}}
\addtox{\value{mm}}
\addtoy{-\value{mm}}
\multiputxy(\value{mm},0){25}{\line(0,1){\value{tmm}}}
\addtox{\value{frmm}}
\addtoy{-\value{mm}}
\multiputxy(\value{fvmm},0){5}{\line(0,1){\value{frmm}}}
\addtox{\value{fvmm}}
\addtoy{\value{fvmm}}
\setcounter{foo}{1}
\multiputxy(\value{tenmm},0){2}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% right in ruler
\sethelpcounter{x}{\textwidth}
\sethelpcounter{y}{-0.55\textheight}
\putxy{\line(1,0){\value{in}}}
\addtox{\value{tenthin}}
\addtoy{-\value{tenthin}}
\multiputxy(\value{tenthin},0){10}{%
\line(0,1){\value{fifthin}}}
\addtox{-\value{twtin}}
\addtoy{\value{twtin}}
\multiputxy(\value{tenthin},0){10}{%
\line(0,1){\value{tenthin}}}
\setcounter{foo}{1}
\addtox{\value{twtin}}
\addtoy{\value{tenthin}}
\addtoy{\value{tenthin}}
\multiputxy(\value{tenthin},0){9}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% top mm ruler
\sethelpcounter{x}{0.45\textwidth}
\setcounter{y}{0}
\putxy{\line(0,1){\value{in}}}
\addtox{-\value{tmm}}
\addtoy{\value{fvmm}}
\multiputxy(0,\value{fvmm}){5}{\line(1,0){\value{frmm}}}
\addtox{\value{mm}}
\addtoy{-\value{frmm}}
\multiputxy(0,\value{mm}){25}{\line(1,0){\value{tmm}}}
\setcounter{foo}{1}
\addtox{-\value{tmm}}
\addtoy{-\value{mm}}
\addtoy{\value{tenmm}}
\multiputxy(0,\value{tenmm}){2}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% top in ruler
\sethelpcounter{x}{0.55\textwidth}
\setcounter{y}{0}
\putxy{\line(0,1){\value{in}}}
\addtox{-\value{tenthin}}
\addtoy{\value{tenthin}}
\multiputxy(0,\value{tenthin}){10}{\line(1,0){\value{fifthin}}}
\addtox{\value{twtin}}
\addtoy{-\value{twtin}}
\multiputxy(0,\value{tenthin}){10}{\line(1,0){\value{tenthin}}}
\setcounter{foo}{1}
\addtox{\value{fifthin}}
\addtoy{\value{twtin}}
\multiputxy(0,\value{tenthin}){9}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% bottom mm ruler
\sethelpcounter{x}{0.45\textwidth}
\setcounter{y}{-\textheight}
\putxy{\line(0,-1){\value{in}}}
\addtox{-\value{tmm}}
\addtoy{-\value{fvmm}}
\multiputxy(0,-\value{fvmm}){5}{\line(1,0){\value{frmm}}}
\addtox{\value{mm}}
\addtoy{\value{frmm}}
\multiputxy(0,-\value{mm}){25}{\line(1,0){\value{tmm}}}
\setcounter{foo}{1}
\addtox{-\value{tmm}}
\addtoy{\value{mm}}
\addtoy{-\value{tenmm}}
\multiputxy(0,-\value{tenmm}){2}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% bottom in ruler
\sethelpcounter{x}{0.55\textwidth}
\setcounter{y}{-\textheight}
\putxy{\line(0,-1){\value{in}}}
\addtox{-\value{tenthin}}
\addtoy{-\value{tenthin}}
\multiputxy(0,-\value{tenthin}){10}{\line(1,0){\value{fifthin}}}
\addtox{\value{twtin}}
\addtoy{\value{twtin}}
\multiputxy(0,-\value{tenthin}){10}{\line(1,0){\value{tenthin}}}
\setcounter{foo}{1}
\addtox{\value{fifthin}}
\addtoy{-\value{twtin}}
\multiputxy(0,-\value{tenthin}){9}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
\end{picture}
\setlength{\help}{\textwidth}
\addtolength{\help}{-2in}
\vfill
\mbox{}\hfill
\begin{minipage}{\help}
The frame on this page should be one
inch from each edge of the paper.\\[10pt]
The rulers at the four edges will indicate how much of the page is
useable. The ticks of the left and top rulers are $1 {\rm mm}$ apart.
The large ticks are $.1''$ apart.
\end{minipage}
\hfill\mbox{}
\vfill
\mbox{}
\ifthenelse{\equal{\doublesided}{y}}{\newpage}{\end{document}}
\begin{picture}(0,0)
\scriptsize
\put(0,-\value{textheight}){%
\framebox(\value{textwidth},\value{textheight}){}}
% left mm ruler
\setcounter{x}{0}
\sethelpcounter{y}{-0.45\textheight}
\putxy{\line(-1,0){\value{in}}}
\addtox{-\value{fvmm}}
\addtoy{-\value{tmm}}
\multiputxy(-\value{fvmm},0){5}{\line(0,1){\value{frmm}}}
\addtoy{\value{mm}}
\multiput(-\value{mm},\value{y})(-\value{mm},0){25}%
{\line(0,1){\value{tmm}}}
\addtoy{\value{frmm}}
\setcounter{foo}{1}
\multiput(-\value{tenmm},\value{y})(-\value{tenmm},0){2}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% left in ruler
\setcounter{x}{0}
\sethelpcounter{y}{-0.55\textheight}
\putxy{\line(-1,0){\value{in}}}
\addtox{-\value{tenthin}}
\addtoy{-\value{tenthin}}
\multiputxy(-\value{tenthin},0){10}{\line(0,1){\value{fifthin}}}
\addtox{\value{twtin}}
\addtoy{\value{twtin}}
\multiputxy(-\value{tenthin},0){10}{\line(0,1){\value{tenthin}}}
\setcounter{foo}{1}
\addtox{-\value{twtin}}
\addtoy{\value{tenthin}}
\addtoy{\value{tenthin}}
\multiputxy(-\value{tenthin},0){9}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% right mm ruler
\sethelpcounter{x}{\textwidth}
\sethelpcounter{y}{-0.45\textheight}
\putxy{\line(1,0){\value{in}}}
\addtox{\value{mm}}
\addtoy{-\value{mm}}
\multiputxy(\value{mm},0){25}{\line(0,1){\value{tmm}}}
\addtox{\value{frmm}}
\addtoy{-\value{mm}}
\multiputxy(\value{fvmm},0){5}{\line(0,1){\value{frmm}}}
\addtox{\value{fvmm}}
\addtoy{\value{fvmm}}
\setcounter{foo}{1}
\multiputxy(\value{tenmm},0){2}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% right in ruler
\sethelpcounter{x}{\textwidth}
\sethelpcounter{y}{-0.55\textheight}
\putxy{\line(1,0){\value{in}}}
\addtox{\value{tenthin}}
\addtoy{-\value{tenthin}}
\multiputxy(\value{tenthin},0){10}{%
\line(0,1){\value{fifthin}}}
\addtox{-\value{twtin}}
\addtoy{\value{twtin}}
\multiputxy(\value{tenthin},0){10}{%
\line(0,1){\value{tenthin}}}
\setcounter{foo}{1}
\addtox{\value{twtin}}
\addtoy{\value{tenthin}}
\addtoy{\value{tenthin}}
\multiputxy(\value{tenthin},0){9}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% top mm ruler
\sethelpcounter{x}{0.45\textwidth}
\setcounter{y}{0}
\putxy{\line(0,1){\value{in}}}
\addtox{-\value{tmm}}
\addtoy{\value{fvmm}}
\multiputxy(0,\value{fvmm}){5}{\line(1,0){\value{frmm}}}
\addtox{\value{mm}}
\addtoy{-\value{frmm}}
\multiputxy(0,\value{mm}){25}{\line(1,0){\value{tmm}}}
\setcounter{foo}{1}
\addtox{-\value{tmm}}
\addtoy{-\value{mm}}
\addtoy{\value{tenmm}}
\multiputxy(0,\value{tenmm}){2}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% top in ruler
\sethelpcounter{x}{0.55\textwidth}
\setcounter{y}{0}
\putxy{\line(0,1){\value{in}}}
\addtox{-\value{tenthin}}
\addtoy{\value{tenthin}}
\multiputxy(0,\value{tenthin}){10}{\line(1,0){\value{fifthin}}}
\addtox{\value{twtin}}
\addtoy{-\value{twtin}}
\multiputxy(0,\value{tenthin}){10}{\line(1,0){\value{tenthin}}}
\setcounter{foo}{1}
\addtox{\value{fifthin}}
\addtoy{\value{twtin}}
\multiputxy(0,\value{tenthin}){9}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% bottom mm ruler
\sethelpcounter{x}{0.45\textwidth}
\setcounter{y}{-\textheight}
\putxy{\line(0,-1){\value{in}}}
\addtox{-\value{tmm}}
\addtoy{-\value{fvmm}}
\multiputxy(0,-\value{fvmm}){5}{\line(1,0){\value{frmm}}}
\addtox{\value{mm}}
\addtoy{\value{frmm}}
\multiputxy(0,-\value{mm}){25}{\line(1,0){\value{tmm}}}
\setcounter{foo}{1}
\addtox{-\value{tmm}}
\addtoy{\value{mm}}
\addtoy{-\value{tenmm}}
\multiputxy(0,-\value{tenmm}){2}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
% bottom in ruler
\sethelpcounter{x}{0.55\textwidth}
\setcounter{y}{-\textheight}
\putxy{\line(0,-1){\value{in}}}
\addtox{-\value{tenthin}}
\addtoy{-\value{tenthin}}
\multiputxy(0,-\value{tenthin}){10}{\line(1,0){\value{fifthin}}}
\addtox{\value{twtin}}
\addtoy{\value{twtin}}
\multiputxy(0,-\value{tenthin}){10}{\line(1,0){\value{tenthin}}}
\setcounter{foo}{1}
\addtox{\value{fifthin}}
\addtoy{-\value{twtin}}
\multiputxy(0,-\value{tenthin}){9}{%
\makebox(0,0){\arabic{foo}}\addtocounter{foo}{1}}
\end{picture}
\setlength{\help}{\textwidth}
\addtolength{\help}{-2in}
\vfill
\mbox{}\hfill
\begin{minipage}{\help}
The frame on this page should be one
inch from each edge of the paper.\\[10pt]
The rulers at the four edges will indicate how much of the page is
useable. The ticks of the left and top rulers are $1 {\rm mm}$ apart.
The large ticks are $.1''$ apart.
\end{minipage}
\hfill\mbox{}
\vfill
\mbox{}
\end{document}
|
