Plan 9 from Bell Labs’s /usr/web/sources/extra/9hist/pc/apbootstrap.s

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.


## diffname pc/apbootstrap.s 1997/0327
## diff -e /dev/null /n/emeliedump/1997/0327/sys/src/brazil/pc/apbootstrap.s
0a
#include "mem.h"

#define NOP		BYTE $0x90		/* NOP */
#define LGDT(gdtptr)	BYTE $0x0F;		/* LGDT */			\
			BYTE $0x01; BYTE $0x16;					\
			WORD $gdtptr
#define FARJUMP16(s, o)	BYTE $0xEA;		/* far jump to ptr16:16 */	\
			WORD $o; WORD $s;					\
			NOP; NOP; NOP
#define FARJUMP32(s, o)	BYTE $0x66;		/* far jump to ptr32:16 */	\
			BYTE $0xEA; LONG $o; WORD $s

#define	DELAY		BYTE $0xEB;		/* JMP .+2 */			\
			BYTE $0x00
#define INVD		BYTE $0x0F; BYTE $0x08
#define WBINVD		BYTE $0x0F; BYTE $0x09

#define PADDR(a)	((a) & ~KZERO)

/*
 * Macros for calculating offsets within the page directory base
 * and page tables. Note that these are assembler-specific hence
 * the '<<2'.
 */
#define PDO(a)		(((((a))>>22) & 0x03FF)<<2)
#define PTO(a)		(((((a))>>12) & 0x03FF)<<2)

/*
 * Start an Application Processor. This must be placed on a 4KB boundary
 * somewhere in the 1st MB of conventional memory (APBOOTSTRAP). However,
 * due to some shortcuts below it's restricted further to within the 1st
 * 64KB. The AP starts in real-mode, with
 *   CS selector set to the startup memory address/16;
 *   CS base set to startup memory address;
 *   CS limit set to 64KB;
 *   CPL and IP set to 0.
 */
TEXT apbootstrap(SB), $0
	FARJUMP16(0, _apbootstrap(SB))
TEXT _apvector(SB), $0				/* address APBOOTSTRAP+0x08 */
	LONG $0
TEXT _appdb(SB), $0				/* address APBOOTSTRAP+0x0C */
	LONG $0
TEXT _apapic(SB), $0				/* address APBOOTSTRAP+0x10 */
	LONG $0
TEXT _apbootstrap(SB), $0			/* address APBOOTSTRAP+0x14 */
	MOVW	CS, AX
	MOVW	AX, DS				/* initialise DS */

	LGDT(gdtptr(SB))			/* load a basic gdt */

	MOVL	CR0, AX
	ORL	$1, AX
	MOVL	AX, CR0				/* turn on protected mode */
	DELAY					/* JMP .+2 */

	BYTE $0xB8; WORD $SELECTOR(1, SELGDT, 0)/* MOVW $SELECTOR(1, SELGDT, 0), AX */
	MOVW	AX, DS
	MOVW	AX, ES
	MOVW	AX, FS
	MOVW	AX, GS
	MOVW	AX, SS

	FARJUMP32(SELECTOR(2, SELGDT, 0), _ap32-KZERO(SB))

/*
 * There's a little mystery here - the Pentium Pro appears to need an identity
 * mmu map for the switch to virtual mode. The manual doesn't say this is necessary
 * and it isn't required on the Pentium.
 * To this end double map KZERO at virtual 0 and undo the mapping once virtual
 * nirvana has been obtained.
 */
TEXT _ap32(SB), $0
	MOVL	_appdb-KZERO(SB), CX		/* physical address of PDB */
	MOVL	(PDO(KZERO))(CX), DX		/* double-map KZERO at 0 */
	MOVL	DX, (PDO(0))(CX)
	MOVL	CX, CR3				/* load and flush the mmu */

	MOVL	CR0, DX
	ORL	$0x80010000, DX			/* PG|WP */
	ANDL	$~0x6000000A, DX		/* ~(CD|NW|TS|MP) */

	MOVL	$_appg(SB), AX
	MOVL	DX, CR0				/* turn on paging */
	JMP*	AX

TEXT _appg(SB), $0
	MOVL	CX, AX				/* physical address of PDB */
	ORL	$KZERO, AX
	MOVL	$0, (PDO(0))(AX)		/* undo double-map of KZERO at 0 */
	MOVL	CX, CR3				/* load and flush the mmu */

	MOVL	$(MACHADDR+MACHSIZE-4), SP

	MOVL	$0, AX
	PUSHL	AX
	POPFL

	MOVL	_apapic(SB), AX
	MOVL	AX, (SP)
	MOVL	_apvector(SB), AX
	CALL*	AX
_aphalt:
	HLT
	JMP	_aphalt

TEXT gdt(SB), $0
	LONG $0x0000; LONG $0
	LONG $0xFFFF; LONG $(SEGG|SEGB|(0xF<<16)|SEGP|SEGPL(0)|SEGDATA|SEGW)
	LONG $0xFFFF; LONG $(SEGG|SEGD|(0xF<<16)|SEGP|SEGPL(0)|SEGEXEC|SEGR)
TEXT gdtptr(SB), $0
	WORD	$(3*8)
	LONG	$gdt-KZERO(SB)
.
## diffname pc/apbootstrap.s 2002/0109
## diff -e /n/emeliedump/1997/0327/sys/src/brazil/pc/apbootstrap.s /n/emeliedump/2002/0109/sys/src/9/pc/apbootstrap.s
112c
	WORD	$(3*8-1)
.
67,69c
 * For Pentiums and higher, the code that enables paging must come from
 * pages that are identity mapped. 
.
18,19d

Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to webmaster@9p.io.