/* Copyright (C) 1992, 1993, 1996, 1998, 1999 Aladdin Enterprises.  All rights reserved.
  
  This software is provided AS-IS with no warranty, either express or
  implied.
  
  This software is distributed under license and may not be copied,
  modified or distributed except as expressly authorized under the terms
  of the license contained in the file LICENSE in this distribution.
  
  For more information about licensing, please refer to
  http://www.ghostscript.com/licensing/. For information on
  commercial licensing, go to http://www.artifex.com/licensing/ or
  contact Artifex Software, Inc., 101 Lucas Valley Road #110,
  San Rafael, CA  94903, U.S.A., +1(415)492-9861.
*/

/* $Id: gdevsppr.c,v 1.9 2004/11/03 07:34:03 giles Exp $*/
/* SPARCprinter driver for Ghostscript */
#include "gdevprn.h"
#include <stdio.h>
#include <sys/types.h>
#include <sys/ioccom.h>
#include <unbdev/lpviio.h>

/*
   Thanks to Martin Schulte (schulte@thp.Uni-Koeln.DE) for contributing
   this driver to Ghostscript.  He supplied the following notes.

The device-driver (normally) returns two differnt types of Error-Conditions,
FATALS and WARNINGS. In case of a fatal, the print routine returns -1, in
case of a warning (such as paper out), a string describing the error is
printed to stderr and the output-operation is repeated after five seconds.

A problem is that not all possible errors seem to return the correct error,
under some circumstance I get the same response as if an error repeated,
that's why there is this the strange code about guessing the error.

I didn't implement asynchronous IO (yet), because "`normal"' multipage-
printings like TEX-Output seem to be printed with the maximum speed whereas
drawings normally occur as one-page outputs, where asynchronous IO doesn't
help anyway.
*/

private dev_proc_open_device(sparc_open);
private dev_proc_print_page(sparc_print_page);

#define SPARC_MARGINS_A4	0.15, 0.12, 0.12, 0.15
#define SPARC_MARGINS_LETTER	0.15, 0.12, 0.12, 0.15

gx_device_procs prn_sparc_procs =
  prn_procs(sparc_open, gdev_prn_output_page, gdev_prn_close);

const gx_device_printer far_data gs_sparc_device =
prn_device(prn_sparc_procs,
  "sparc",
  DEFAULT_WIDTH_10THS,DEFAULT_HEIGHT_10THS,
  400,400,
  0,0,0,0,
  1,
  sparc_print_page);

/* Open the printer, and set the margins. */
private int
sparc_open(gx_device *pdev)
{	/* Change the margins according to the paper size. */
	const float *m;
	static const float m_a4[4] = { SPARC_MARGINS_A4 };
	static const float m_letter[4] = { SPARC_MARGINS_LETTER };

	m = (pdev->height / pdev->y_pixels_per_inch >= 11.1 ? m_a4 : m_letter);
	gx_device_set_margins(pdev, m, true);
	return gdev_prn_open(pdev);
}

char *errmsg[]={
  "EMOTOR",
  "EROS",
  "EFUSER",
  "XEROFAIL",
  "ILCKOPEN",
  "NOTRAY",
  "NOPAPR",
  "XITJAM",
  "MISFEED",
  "WDRUMX",
  "WDEVEX",
  "NODRUM",
  "NODEVE",
  "EDRUMX",
  "EDEVEX",
  "ENGCOLD",
  "TIMEOUT",
  "EDMA",
  "ESERIAL"
  };

/* The static buffer is unfortunate.... */
static char err_buffer[80];
private char *
err_code_string(int err_code)
  {
  if ((err_code<EMOTOR)||(err_code>ESERIAL))
    {
    sprintf(err_buffer,"err_code out of range: %d",err_code);
    return err_buffer;
    }
  return errmsg[err_code];
  }

int warning=0;

private int
sparc_print_page(gx_device_printer *pdev, FILE *prn)
  {
  struct lpvi_page lpvipage;
  struct lpvi_err lpvierr;
  char *out_buf;
  int out_size;
  if (ioctl(fileno(prn),LPVIIOC_GETPAGE,&lpvipage)!=0)
    {
    errprintf("sparc_print_page: LPVIIOC_GETPAGE failed\n");
    return -1;
    }
  lpvipage.bitmap_width=gdev_mem_bytes_per_scan_line((gx_device *)pdev);
  lpvipage.page_width=lpvipage.bitmap_width*8;
  lpvipage.page_length=pdev->height;
  lpvipage.resolution = (pdev->x_pixels_per_inch == 300 ? DPI300 : DPI400);
  if (ioctl(fileno(prn),LPVIIOC_SETPAGE,&lpvipage)!=0)
    {
    errprintf("sparc_print_page: LPVIIOC_SETPAGE failed\n");
    return -1;
    }
  out_size=lpvipage.bitmap_width*lpvipage.page_length;
  out_buf=gs_malloc(pdev->memory, out_size,1,"sparc_print_page: out_buf");
  gdev_prn_copy_scan_lines(pdev,0,out_buf,out_size);
  while (write(fileno(prn),out_buf,out_size)!=out_size)
    {
    if (ioctl(fileno(prn),LPVIIOC_GETERR,&lpvierr)!=0)
      {
      errprintf("sparc_print_page: LPVIIOC_GETERR failed\n");
      return -1;
      }
    switch (lpvierr.err_type)
      {
      case 0:
	if (warning==0)
          {
          errprintf(
            "sparc_print_page: Printer Problem with unknown reason...");
          dflush();
          warning=1;
          }
	sleep(5);
	break;
      case ENGWARN:
	errprintf(
          "sparc_print_page: Printer-Warning: %s...",
          err_code_string(lpvierr.err_code));
	dflush();
	warning=1;
	sleep(5);
	break;
      case ENGFATL:
	errprintf(
          "sparc_print_page: Printer-Fatal: %s\n",
          err_code_string(lpvierr.err_code));
	return -1;
      case EDRVR:
	errprintf(
          "sparc_print_page: Interface/driver error: %s\n",
          err_code_string(lpvierr.err_code));
	return -1;
      default:
	errprintf(
          "sparc_print_page: Unknown err_type=%d(err_code=%d)\n",
          lpvierr.err_type,lpvierr.err_code);
	return -1;
      }
    }
  if (warning==1)
    {
    errprintf("OK.\n");
    warning=0;
    }
  gs_free(pdev->memory, out_buf,out_size,1,"sparc_print_page: out_buf");
  return 0;
  }