# Copyright (C) 1997, 2000 Aladdin Enterprises. All rights reserved.
#
# This software is provided AS-IS with no warranty, either express or
# implied.
#
# This software is distributed under license and may not be copied,
# modified or distributed except as expressly authorized under the terms
# of the license contained in the file LICENSE in this distribution.
#
# For more information about licensing, please refer to
# http://www.ghostscript.com/licensing/. For information on
# commercial licensing, go to http://www.artifex.com/licensing/ or
# contact Artifex Software, Inc., 101 Lucas Valley Road #110,
# San Rafael, CA 94903, U.S.A., +1(415)492-9861.
# $Id: openvms.mmk,v 1.31 2004/12/10 23:48:48 giles Exp $
# makefile for OpenVMS VAX and Alpha using MMK
#
# Please contact Jim Dunham (dunham@omtool.com) if you have questions.
# Addapted for MMK by Jouk Jansen (joukj@hrem.stm.tudelft.nl)
# Support for VAX C on OpenVMS was removed in release 6.01 by Aladdin:
# DEC C is now used on both VAX and Alpha platforms.
#
# ------------------------------- Options ------------------------------- #
###### This section is the only part of the file you should need to edit.
# on the make command line specify:
# mmk/descrip=[.src]openvms.mmk/macro=("DECWINDOWS1_2={0,1}")
# Define the directory for the final executable, and the
# source, generated intermediate file, and object directories
# for the graphics library (GL) and the PostScript/PDF interpreter (PS).
BINDIR=[.bin]
GLSRCDIR=[.src]
GLGENDIR=[.obj]
GLOBJDIR=[.obj]
PSSRCDIR=[.src]
PSGENDIR=[.obj]
PSOBJDIR=[.obj]
PSLIBDIR=[.lib]
# Because of OpenVMS syntactic problems, the following redundant definitions
# are necessary. If you are using more than one GENDIR and/or OBJDIR,
# you will have to edit the code below that creates these directories.
BIN_DIR=BIN.DIR
OBJ_DIR=OBJ.DIR
# create directories
.first
if f$search("$(BIN_DIR)") .eqs. "" then create/directory/log $(BINDIR)
if f$search("$(OBJ_DIR)") .eqs. "" then create/directory/log $(GLOBJDIR)
# Do not edit the next group of lines.
#.include $(COMMONDIR)vmscdefs.mak
#.include $(COMMONDIR)vmsdefs.mak
#.include $(COMMONDIR)generic.mak
.include $(GLSRCDIR)version.mak
DD=$(GLGENDIR)
GLD=$(GLGENDIR)
PSD=$(PSGENDIR)
# ------ Generic options ------ #
# Define the directory that will hold documentation at runtime.
GS_DOCDIR=GS_DOC
#GS_DOCDIR=SYS$COMMON:[GS]
# Define the default directory/ies for the runtime
# initialization and font files. Separate multiple directories with ,.
GS_LIB_DEFAULT=GS_LIB
#GS_LIB_DEFAULT=SYS$COMMON:[GS],SYS$COMMON:[GS.FONT]
# Define whether or not searching for initialization files should always
# look in the current directory first. This leads to well-known security
# and confusion problems, but users insist on it.
# NOTE: this also affects searching for files named on the command line:
# see the "File searching" section of Use.htm for full details.
# Because of this, setting SEARCH_HERE_FIRST to 0 is not recommended.
SEARCH_HERE_FIRST=1
# Define the name of the interpreter initialization file.
# (There is no reason to change this.)
GS_INIT=GS_INIT.PS
# Choose generic configuration options.
# Setting DEBUG=1 includes debugging features in the code
DEBUG=0
# Setting TDEBUG=1 includes symbol table information for the debugger,
# and also enables stack tracing on failure.
TDEBUG=
# Setting CDEBUG=1 enables 'C' compiler debugging and turns off optimization
# Code is substantially slower and larger.
CDEBUG=
# Define the name of the executable file.
GS=GS
# Define the name of a pre-built executable that can be invoked at build
# time. Currently, this is only needed for compiled fonts. The usual
# alternatives are:
# - the standard name of Ghostscript on your system (typically `gs'):
BUILD_TIME_GS=GS
# - the name of the executable you are building now. If you choose this
# option, then you must build the executable first without compiled fonts,
# and then again with compiled fonts.
#BUILD_TIME_GS=$(BINDIR)$(GS) -I$(PSLIBDIR)
# Define the directory where the IJG JPEG library sources are stored,
# and the major version of the library that is stored there.
# You may need to change this if the IJG library version changes.
# See jpeg.mak for more information.
.ifdef SYSLIB
JSRCDIR=sys$library:
.else
JSRCDIR=[--.jpeg-6b]
.endif
JVERSION=6
# Define the directory where the PNG library sources are stored,
# and the version of the library that is stored there.
# You may need to change this if the libpng version changes.
# See libpng.mak for more information.
.ifdef SYSLIB
PSRCDIR=sys$library:
.else
PSRCDIR=[--.libpng-1_2_8]
.endif
PVERSION=10208
# Define the directory where the zlib sources are stored.
# See zlib.mak for more information.
.ifdef SYSLIB
ZSRCDIR=sys$library:
.else
ZSRCDIR=[--.zlib-1_2_1]
.endif
# Define the directory where the jbig2dec library sources are stored.
# See jbig2.mak for more information
.ifdef SYSLIB
JBIG2SRCDIR=sys$library:
.else
JBIG2SRCDIR=[--.jbig2dec-0_7]
.endif
# Define the directory where the icclib source are stored.
# See icclib.mak for more information
ICCSRCDIR=[.icclib]
# IJS has not been ported to OpenVMS. If you do the port,
# you'll need to set these values. You'll also need to
# include the ijs.mak makefile (right after icclib.mak).
#
# Define the directory where the ijs source is stored,
# and the process forking method to use for the server.
# See ijs.mak for more information.
#IJSSRCDIR=[.ijs]
#IJSEXECTYPE=unix
# Note that built-in third-party libraries aren't available.
SHARE_JPEG=0
SHARE_LIBPNG=0
SHARE_ZLIB=0
SHARE_JBIG2=0
# Define the path to X11 include files
X_INCLUDE=DECW$INCLUDE
# ------ Platform-specific options ------ #
# Define the drive, directory, and compiler name for the 'C' compiler.
# COMP is the full compiler path name.
.ifdef DEBUG
SW_DEBUG=/DEBUG/NOOPTIMIZE
.else
# This should include /OPTIMIZE, but some OpenVMS compilers have an
# optimizer bug that causes them to generate incorrect code for gdevpsfx.c,
# so we must disable optimization. (Eventually we will check for the bug
# in genarch and enable optimization if it is safe.)
#SW_DEBUG=/NODEBUG/OPTIMIZE
SW_DEBUG=/NODEBUG/NOOPTIMIZE
.endif
SW_PLATFORM=/DECC/PREFIX=ALL/NESTED_INCLUDE=PRIMARY/name=(as_is,short)/nowarn
# Define any other compilation flags.
# Including defines for A4 paper size
.ifdef A4_PAPER
SW_PAPER=/DEFINE=("A4","HAVE_MKSTEMP")
.else
SW_PAPER=/DEFINE=("HAVE_MKSTEMP")
.endif
.ifdef IEEE
SW_IEEE=/float=ieee
.else
SW_IEEE=
.endif
COMP=CC$(SW_DEBUG)$(SW_PLATFORM)$(SW_PAPER)$(SW_IEEE)
# LINK is the full linker path name
.ifdef TDEBUG
LINKER=LINK/DEBUG/TRACEBACK
.else
LINKER=LINK/NODEBUG/NOTRACEBACK
.endif
# INCDIR contains the include files
INCDIR=
# LIBDIR contains the library files
LIBDIR=
# Define the .dev module that implements thread and synchronization
# primitives for this platform. Don't change this unless you really know
# what you're doing.
SYNC=posync
# ------ Devices and features ------ #
# Choose the device(s) to include. See devs.mak for details,
# devs.mak and contrib.mak for the list of available devices.
DEVICE_DEVS=$(DD)x11.dev $(DD)x11alpha.dev $(DD)x11cmyk.dev $(DD)x11gray2.dev $(DD)x11gray4.dev $(DD)x11mono.dev
DEVICE_DEVS1=
DEVICE_DEVS2=
DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4.dev $(DD)ljet4d.dev
DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj550.dev $(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev
DEVICE_DEVS5=$(DD)uniprint.dev
DEVICE_DEVS6=$(DD)bj10e.dev $(DD)bj200.dev $(DD)bjc600.dev $(DD)bjc800.dev
DEVICE_DEVS7=$(DD)faxg3.dev $(DD)faxg32d.dev $(DD)faxg4.dev
DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev
DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev
DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev
DEVICE_DEVS11=$(DD)tiff12nc.dev $(DD)tiff24nc.dev
DEVICE_DEVS12=$(DD)psmono.dev $(DD)psgray.dev $(DD)psrgb.dev $(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev
DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png16m.dev $(DD)pngalpha.dev
DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev
DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)pswrite.dev $(DD)epswrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev
DEVICE_DEVS16=$(DD)bbox.dev
# Overflow from DEVS9
DEVICE_DEVS17=$(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pkm.dev $(DD)pkmraw.dev $(DD)pksm.dev $(DD)pksmraw.dev
DEVICE_DEVS18=
DEVICE_DEVS19=
DEVICE_DEVS20=
DEVICE_DEVS21=
DEVICE_DEVS21=
# Choose the language feature(s) to include. See gs.mak for details.
FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)epsf.dev $(PSD)fapi.dev $(PSD)jbig2.dev
# Choose whether to compile the .ps initialization files into the executable.
# See gs.mak for details.
COMPILE_INITS=0
# Choose whether to store band lists on files or in memory.
# The choices are 'file' or 'memory'.
BAND_LIST_STORAGE=file
# Choose which compression method to use when storing band lists in memory.
# The choices are 'lzw' or 'zlib'.
BAND_LIST_COMPRESSOR=zlib
# Choose the implementation of file I/O: 'stdio', 'fd', or 'both'.
# See gs.mak and sfxfd.c for more details.
FILE_IMPLEMENTATION=stdio
# Choose the implementation of stdio: '' for file I/O and 'c' for callouts
# See gs.mak and ziodevs.c/ziodevsc.c for more details.
STDIO_IMPLEMENTATION=c
# Define the name table capacity size of 2^(16+n).
EXTEND_NAMES=0
# Define whether the system constants are writable.
SYSTEM_CONSTANTS_ARE_WRITABLE=0
# Define the platform name.
PLATFORM=openvms_
# Define the name of the makefile -- used in dependencies.
MAKEFILE=$(GLSRCDIR)openvms.mmk
TOP_MAKEFILES=$(MAKEFILE)
# Define the platform options
PLATOPT=
# Patch a couple of PC-specific things that aren't relevant to OpenVMS builds,
# but that cause `make' to produce warnings.
PCFBASM=
# It is very unlikely that anyone would want to edit the remaining
# symbols, but we describe them here for completeness:
# Define the suffix for command files (e.g., null or .bat).
CMD=
# Define the directory separator character (\ for MS-DOS, / for Unix,
# nothing for OpenVMS).
D=
# Define the brackets for passing preprocessor definitions to the C compiler.
NULL=
D_=/DEFINE="
_D_=$(NULL)=
_D="
# Define the syntax of search paths for the C compiler.
# The OpenVMS compilers uses /INCLUDE=(dir1, dir2, ...dirn),
# and only a single /INCLUDE switch is allowed in the command line.
I_=/INCLUDE=(
II=,
_I=)
# Define the string for specifying the output file from the C compiler.
O_=/OBJECT=
# Define the quoting string for mixed-case arguments.
# (OpenVMS is the only platform where this isn't an empty string.)
Q="
# Define the extension for executable files (e.g., null or .exe).
XE=.exe
# Define the extension for executable files for the auxiliary programs
# (e.g., null or .exe).
XEAUX=.exe
# Define the list of files that `make clean' removes.
BEGINFILES=$(GLSRCDIR)OPENVMS.OPT $(GLSRCDIR)OPENVMS.COM
# Define the C invocation for auxiliary programs (echogs, genarch).
# We don't need to define this separately.
CCAUX=
# Define the C invocation for normal compilation.
CC=$(COMP)
# Define the Link invocation.
LINK=$(LINKER)/EXE=$@ $+,$(GLSRCDIR)OPENVMS.OPT/OPTION
# Define the auxiliary program dependency. We don't need this.
AK=
# Define the syntax for command, object, and executable files.
OBJ=obj
# Define the prefix for image invocations.
EXP=MCR $(NULL)
# Define the prefix for shell invocations.
SH=
# Define generic commands.
CP_=@$(GLSRCDIR)COPY_ONE
# Define the command for deleting (a) file(s) (including wild cards)
RM_=@$(GLSRCDIR)RM_ONE
# Define the command for deleting multiple files / patterns.
RMN_=@$(GLSRCDIR)RM_ALL
# Define the arguments for genconf.
CONFILES=-p %s
CONFLDTR=-o
# Define the generic compilation rules.
.suffixes : .c .obj .exe
.obj.exe :
$(LINK)
# ---------------------------- End of options ---------------------------- #
# Define various incantations of the 'c' compiler.
CC_=$(COMP)
CC_INT=$(CC_)
CC_NO_WARN=$(CC_)
# ------------------- Include the generic makefiles ---------------------- #
all : macro [.lib]Fontmap. $(GS_XE)
#.include $(COMMONDIR)/ansidefs.mak
#.include $(COMMONDIR)/vmsdefs.mak
#.include $(COMMONDIR)/generic.mak
.include $(GLSRCDIR)gs.mak
.include $(GLSRCDIR)lib.mak
.include $(PSSRCDIR)int.mak
.include $(PSSRCDIR)cfonts.mak
.include $(GLSRCDIR)jpeg.mak
# zlib.mak must precede libpng.mak
.include $(GLSRCDIR)zlib.mak
.include $(GLSRCDIR)libpng.mak
JBIG2_EXTRA_OBJS=$(JBIG2OBJDIR)$(D)snprintf.$(OBJ)
.include $(GLSRCDIR)jbig2.mak
.include $(GLSRCDIR)icclib.mak
.include $(GLSRCDIR)devs.mak
.include $(GLSRCDIR)contrib.mak
# ----------------------------- Main program ------------------------------
macro :
.ifdef A4_PAPER
@ a4p = 1
.else
@ a4p = 0
.endif
.ifdef IEEE
@ i3e = 1
.else
@ i3e = 0
.endif
.ifdef SYSLIB
@ dsl = 1
.else
@ dsl = 0
.endif
@ decc = f$search("SYS$SYSTEM:DECC$COMPILER.EXE").nes.""
@ decw12 = f$search("SYS$SHARE:DECW$XTLIBSHRR5.EXE").nes.""
@ macro = ""
@ if dsl.or.a4p.or.decc.or.decw12 then macro = "/MACRO=("
@ if decw12 then macro = macro + "DECWINDOWS1_2=1,"
@ if a4p then macro = macro + "A4_PAPER=1,"
@ if dsl then macro = macro + "SYSLIB=1,"
@ if i3e then macro = macro + "IEEE=1,"
@ if macro.nes."" then macro = f$extract(0,f$length(macro)-1,macro)+ ")"
$(MMS)$(MMSQUALIFIERS)'macro' $(GS_XE)
$(GS_XE) : openvms $(GLGEN)arch.h $(GLOBJDIR)gs.$(OBJ) $(INT_ALL) $(LIB_ALL)
$(LINKER)/EXE=$@ $(GLOBJDIR)gs.$(OBJ),$(ld_tr)/OPTIONS,$(GLSRCDIR)OPENVMS.OPT/OPTION
@ Write Sys$Output "Build of GhostScript is complete!"
# OpenVMS.dev
openvms__=$(GLOBJ)gp_getnv.$(OBJ) $(GLOBJ)gp_vms.$(OBJ) $(GLOBJ)gp_stdia.$(OBJ)
$(GLGEN)openvms_.dev : $(openvms__) $(GLGEN)nosync.dev
$(SETMOD) $(GLGEN)openvms_ $(openvms__) -include $(GLGEN)nosync
$(ECHOGS_XE) : $(GLOBJDIR)echogs.$(OBJ)
$(GENARCH_XE) : $(GLOBJDIR)genarch.$(OBJ)
$(GENCONF_XE) : $(GLOBJDIR)genconf.$(OBJ)
$(GENDEV_XE) : $(GLOBJDIR)gendev.$(OBJ)
$(GENHT_XE) : $(GLOBJDIR)genht.$(OBJ)
$(GENINIT_XE) : $(GLOBJDIR)geninit.$(OBJ)
$(GLOBJDIR)echogs.$(OBJ) : $(GLSRCDIR)echogs.c
$(GLOBJDIR)genarch.$(OBJ) : $(GLSRCDIR)genarch.c $(GENARCH_DEPS)
$(GLOBJDIR)genconf.$(OBJ) : $(GLSRCDIR)genconf.c $(GENCONF_DEPS)
$(GLOBJDIR)gendev.$(OBJ) : $(GLSRCDIR)gendev.c $(GENDEV_DEPS)
# ****** NEED TO ADD $(GENHT_CFLAGS) HERE ******
$(GLOBJDIR)genht.$(OBJ) : $(GLSRCDIR)genht.c $(GENHT_DEPS)
$(GLOBJDIR)geninit.$(OBJ) : $(GLSRCDIR)geninit.c $(GENINIT_DEPS)
$(GLOBJ)gp_vms.$(OBJ) : $(GLSRC)gp_vms.c $(string__h) $(memory__h) $(gx_h) $(gp_h) $(gpmisc_h) $(gsstruct_h)
$(CC_)/include=($(GLGENDIR),$(GLSRCDIR))/obj=$(GLOBJ)gp_vms.$(OBJ) $(GLSRC)gp_vms.c
$(GLOBJ)gp_stdia.$(OBJ) : $(GLSRC)gp_stdia.c $(AK) $(stdio__h) $(time__h) $(unistd__h) $(gx_h) $(gp_h)
$(CC_)/incl=$(GLOBJ)/obj=$(GLOBJ)gp_stdia.$(OBJ) $(GLSRC)gp_stdia.c
# Preliminary definitions
openvms : $(GLSRCDIR)openvms.com $(GLSRCDIR)openvms.opt
@$(GLSRCDIR)OPENVMS
$(GLSRCDIR)openvms.com : $(GLSRCDIR)append_l.com
@$(GLSRCDIR)APPEND_L $@ "$ DEFINE/JOB X11 $(X_INCLUDE)"
@$(GLSRCDIR)APPEND_L $@ "$ DEFINE/JOB GS_LIB ''F$ENVIRONMENT(""DEFAULT"")'"
@$(GLSRCDIR)APPEND_L $@ "$ DEFINE/JOB GS_DOC ''F$ENVIRONMENT(""DEFAULT"")'"
@$(GLSRCDIR)APPEND_L $@ "$ DEFINE/JOB DECC$USER_INCLUDE ''F$ENVIRONMENT(""DEFAULT"")', DECW$INCLUDE, DECC$LIBRARY_INCLUDE, SYS$LIBRARY"
@$(GLSRCDIR)APPEND_L $@ "$ DEFINE/JOB DECC$SYSTEM_INCLUDE ''F$ENVIRONMENT(""DEFAULT"")', DECW$INCLUDE, DECC$LIBRARY_INCLUDE, SYS$LIBRARY"
@$(GLSRCDIR)APPEND_L $@ "$ DEFINE/JOB SYS "DECC$LIBRARY_INCLUDE,SYS$LIBRARY"
$(GLSRCDIR)openvms.opt :
.ifdef DECWINDOWS1_2
@$(GLSRCDIR)APPEND_L $@ "SYS$SHARE:DECW$XMLIBSHR12.EXE/SHARE"
@$(GLSRCDIR)APPEND_L $@ "SYS$SHARE:DECW$XTLIBSHRR5.EXE/SHARE"
@$(GLSRCDIR)APPEND_L $@ "SYS$SHARE:DECW$XLIBSHR.EXE/SHARE"
.else
@$(GLSRCDIR)APPEND_L $@ "SYS$SHARE:DECW$XMLIBSHR.EXE/SHARE"
@$(GLSRCDIR)APPEND_L $@ "SYS$SHARE:DECW$XTSHR.EXE/SHARE"
@$(GLSRCDIR)APPEND_L $@ "SYS$SHARE:DECW$XLIBSHR.EXE/SHARE"
.endif
@$(GLSRCDIR)APPEND_L $@ ""Ident="""""GS $(GS_DOT_VERSION)"""""
# The platform-specific makefiles must also include rules for creating
# certain dynamically generated files:
# gconfig_.h - this indicates the presence or absence of
# certain system header files that are located in different
# places on different systems. (It could be generated by
# the GNU `configure' program.)
# gconfigv.h - this indicates the status of certain machine-
# and configuration-specific features derived from definitions
# in the platform-specific makefile.
$(gconfig__h) : $(TOP_MAKEFILES) $(ECHOGS_XE)
$(EXP)$(ECHOGS_XE) -w $(gconfig__h) -x 23 define "HAVE_SYS_TIME_H"
$(gconfigv_h) : $(TOP_MAKEFILES) $(ECHOGS_XE)
$(EXP)$(ECHOGS_XE) -w $(gconfigv_h) -x 23 define "USE_ASM" 0
$(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "USE_FPU" 1
$(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "EXTEND_NAMES" 0$(EXTEND_NAMES)
$(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "SYSTEM_CONSTANTS_ARE_WRITABLE" 0$(SYSTEM_CONSTANTS_ARE_WRITABLE)
|
