/* Copyright (C) 1994, 2000 Aladdin Enterprises. All rights reserved.
This software is provided AS-IS with no warranty, either express or
implied.
This software is distributed under license and may not be copied,
modified or distributed except as expressly authorized under the terms
of the license contained in the file LICENSE in this distribution.
For more information about licensing, please refer to
http://www.ghostscript.com/licensing/. For information on
commercial licensing, go to http://www.artifex.com/licensing/ or
contact Artifex Software, Inc., 101 Lucas Valley Road #110,
San Rafael, CA 94903, U.S.A., +1(415)492-9861.
*/
/* $Id: sfxfd.c,v 1.10 2004/08/05 17:02:36 stefan Exp $ */
/* File stream implementation using direct OS calls */
/******
****** NOTE: THIS FILE MAY NOT COMPILE ON NON-UNIX PLATFORMS, AND MAY
****** REQUIRE EDITING ON SOME UNIX PLATFORMS.
******/
#include "stdio_.h" /* includes std.h */
#include "errno_.h"
#include "memory_.h"
#include "unistd_.h" /* for read, write, fsync, lseek */
#include "gdebug.h"
#include "gpcheck.h"
#include "stream.h"
#include "strimpl.h"
/*
* This is an alternate implementation of file streams. It still uses
* FILE * in the interface, but it uses direct OS calls for I/O.
* It also includes workarounds for the nasty habit of System V Unix
* of breaking out of read and write operations with EINTR, EAGAIN,
* and/or EWOULDBLOCK "errors".
*
* The interface should be identical to that of sfxstdio.c. However, in
* order to allow both implementations to exist in the same executable, we
* optionally use different names for sread_file, swrite_file, and
* sappend_file, and omit sread_subfile (the public procedures).
* See sfxboth.c.
*/
#ifdef KEEP_FILENO_API
/* Provide prototypes to avoid compiler warnings. */
void
sread_fileno(stream *, FILE *, byte *, uint),
swrite_fileno(stream *, FILE *, byte *, uint),
sappend_fileno(stream *, FILE *, byte *, uint);
#else
# define sread_fileno sread_file
# define swrite_fileno swrite_file
# define sappend_fileno sappend_file
#endif
/* Forward references for file stream procedures */
private int
s_fileno_available(stream *, long *),
s_fileno_read_seek(stream *, long),
s_fileno_read_close(stream *),
s_fileno_read_process(stream_state *, stream_cursor_read *,
stream_cursor_write *, bool);
private int
s_fileno_write_seek(stream *, long),
s_fileno_write_flush(stream *),
s_fileno_write_close(stream *),
s_fileno_write_process(stream_state *, stream_cursor_read *,
stream_cursor_write *, bool);
private int
s_fileno_switch(stream *, bool);
/* Get the file descriptor number of a stream. */
inline private int
sfileno(const stream *s)
{
return fileno(s->file);
}
/* Get the current position of a file descriptor. */
inline private long
ltell(int fd)
{
return lseek(fd, 0L, SEEK_CUR);
}
/* Define the System V interrupts that require retrying a call. */
private bool
errno_is_retry(int errn)
{
switch (errn) {
#ifdef EINTR
case EINTR: return true;
#endif
#if defined(EAGAIN) && (!defined(EINTR) || EAGAIN != EINTR)
case EAGAIN: return true;
#endif
#if defined(EWOULDBLOCK) && (!defined(EINTR) || EWOULDBLOCK != EINTR) && (!defined(EAGAIN) || EWOULDBLOCK != EAGAIN)
case EWOULDBLOCK: return true;
#endif
default: return false;
}
}
/* ------ File reading ------ */
/* Initialize a stream for reading an OS file. */
void
sread_fileno(register stream * s, FILE * file, byte * buf, uint len)
{
static const stream_procs p = {
s_fileno_available, s_fileno_read_seek, s_std_read_reset,
s_std_read_flush, s_fileno_read_close, s_fileno_read_process,
s_fileno_switch
};
/*
* There is no really portable way to test seekability,
* but this should work on most systems.
*/
int fd = fileno(file);
long curpos = ltell(fd);
bool seekable = (curpos != -1L && lseek(fd, curpos, SEEK_SET) != -1L);
s_std_init(s, buf, len, &p,
(seekable ? s_mode_read + s_mode_seek : s_mode_read));
if_debug2('s', "[s]read file=0x%lx, fd=%d\n", (ulong) file,
fileno(file));
s->file = file;
s->file_modes = s->modes;
s->file_offset = 0;
s->file_limit = max_long;
}
/* Confine reading to a subfile. This is primarily for reusable streams. */
/*
* We omit this procedure if we are also include sfxstdio.c, which has an
* identical definition.
*/
#ifndef KEEP_FILENO_API
int
sread_subfile(stream *s, long start, long length)
{
if (s->file == 0 || s->modes != s_mode_read + s_mode_seek ||
s->file_offset != 0 || s->file_limit != max_long ||
((s->position < start || s->position > start + length) &&
sseek(s, start) < 0)
)
return ERRC;
s->position -= start;
s->file_offset = start;
s->file_limit = length;
return 0;
}
#endif
/* Procedures for reading from a file */
private int
s_fileno_available(register stream * s, long *pl)
{
long max_avail = s->file_limit - stell(s);
long buf_avail = sbufavailable(s);
int fd = sfileno(s);
*pl = min(max_avail, buf_avail);
if (sseekable(s)) {
long pos, end;
pos = ltell(fd);
if (pos < 0)
return ERRC;
end = lseek(fd, 0L, SEEK_END);
if (lseek(fd, pos, SEEK_SET) < 0 || end < 0)
return ERRC;
buf_avail += end - pos;
*pl = min(max_avail, buf_avail);
if (*pl == 0)
*pl = -1; /* EOF */
} else {
if (*pl == 0)
*pl = -1; /* EOF */
}
return 0;
}
private int
s_fileno_read_seek(register stream * s, long pos)
{
uint end = s->srlimit - s->cbuf + 1;
long offset = pos - s->position;
if (offset >= 0 && offset <= end) { /* Staying within the same buffer */
s->srptr = s->cbuf + offset - 1;
return 0;
}
if (pos < 0 || pos > s->file_limit ||
lseek(sfileno(s), s->file_offset + pos, SEEK_SET) < 0
)
return ERRC;
s->srptr = s->srlimit = s->cbuf - 1;
s->end_status = 0;
s->position = pos;
return 0;
}
private int
s_fileno_read_close(stream * s)
{
FILE *file = s->file;
if (file != 0) {
s->file = 0;
return (fclose(file) ? ERRC : 0);
}
return 0;
}
/* Process a buffer for a file reading stream. */
/* This is the first stream in the pipeline, so pr is irrelevant. */
private int
s_fileno_read_process(stream_state * st, stream_cursor_read * ignore_pr,
stream_cursor_write * pw, bool last)
{
stream *s = (stream *)st; /* no separate state */
int fd = sfileno(s);
uint max_count;
int nread, status;
again:
max_count = pw->limit - pw->ptr;
status = 1;
if (s->file_limit < max_long) {
long limit_count = s->file_offset + s->file_limit - ltell(fd);
if (max_count > limit_count)
max_count = limit_count, status = EOFC;
}
/*
* In the Mac MetroWerks compiler, the prototype for read incorrectly
* declares the second argument of read as char * rather than void *.
* Work around this here.
*/
nread = read(fd, (void *)(pw->ptr + 1), max_count);
if (nread > 0)
pw->ptr += nread;
else if (nread == 0)
status = EOFC;
else if (errno_is_retry(errno)) /* Handle System V interrupts */
goto again;
else
status = ERRC;
process_interrupts(s->memory);
return status;
}
/* ------ File writing ------ */
/* Initialize a stream for writing an OS file. */
void
swrite_fileno(register stream * s, FILE * file, byte * buf, uint len)
{
static const stream_procs p = {
s_std_noavailable, s_fileno_write_seek, s_std_write_reset,
s_fileno_write_flush, s_fileno_write_close, s_fileno_write_process,
s_fileno_switch
};
s_std_init(s, buf, len, &p,
(file == stdout ? s_mode_write : s_mode_write + s_mode_seek));
if_debug2('s', "[s]write file=0x%lx, fd=%d\n", (ulong) file,
fileno(file));
s->file = file;
s->file_modes = s->modes;
s->file_offset = 0; /* in case we switch to reading later */
s->file_limit = max_long; /* ibid. */
}
/* Initialize for appending to an OS file. */
void
sappend_fileno(register stream * s, FILE * file, byte * buf, uint len)
{
swrite_fileno(s, file, buf, len);
s->modes = s_mode_write + s_mode_append; /* no seek */
s->file_modes = s->modes;
s->position = lseek(fileno(file), 0L, SEEK_END);
}
/* Procedures for writing on a file */
private int
s_fileno_write_seek(stream * s, long pos)
{
/* We must flush the buffer to reposition. */
int code = sflush(s);
if (code < 0)
return code;
if (lseek(sfileno(s), pos, SEEK_SET) < 0)
return ERRC;
s->position = pos;
return 0;
}
private int
s_fileno_write_flush(register stream * s)
{
int result = s_process_write_buf(s, false);
discard(fsync(sfileno(s)));
return result;
}
private int
s_fileno_write_close(register stream * s)
{
s_process_write_buf(s, true);
return s_fileno_read_close(s);
}
/* Process a buffer for a file writing stream. */
/* This is the last stream in the pipeline, so pw is irrelevant. */
private int
s_fileno_write_process(stream_state * st, stream_cursor_read * pr,
stream_cursor_write * ignore_pw, bool last)
{
int nwrite, status;
uint count;
again:
count = pr->limit - pr->ptr;
/* Some versions of the DEC C library on AXP architectures */
/* give an error on write if the count is zero! */
if (count == 0) {
process_interrupts((stream*)st->memory);
return 0;
}
/* See above regarding the Mac MetroWorks compiler. */
nwrite = write(sfileno((stream *)st), (const void *)(pr->ptr + 1), count);
if (nwrite >= 0) {
pr->ptr += nwrite;
status = 0;
} else if (errno_is_retry(errno)) /* Handle System V interrupts */
goto again;
else
status = ERRC;
process_interrupts((stream *)st->memory);
return status;
}
/* ------ File switching ------ */
/* Switch a file stream to reading or writing. */
private int
s_fileno_switch(stream * s, bool writing)
{
uint modes = s->file_modes;
int fd = sfileno(s);
long pos;
if (writing) {
if (!(s->file_modes & s_mode_write))
return ERRC;
pos = stell(s);
if_debug2('s', "[s]switch 0x%lx to write at %ld\n",
(ulong) s, pos);
lseek(fd, pos, SEEK_SET); /* pacify OS */
if (modes & s_mode_append) {
sappend_file(s, s->file, s->cbuf, s->cbsize); /* sets position */
} else {
swrite_file(s, s->file, s->cbuf, s->cbsize);
s->position = pos;
}
s->modes = modes;
} else {
if (!(s->file_modes & s_mode_read))
return ERRC;
pos = stell(s);
if_debug2('s', "[s]switch 0x%lx to read at %ld\n",
(ulong) s, pos);
if (sflush(s) < 0)
return ERRC;
lseek(fd, 0L, SEEK_CUR); /* pacify OS */
sread_file(s, s->file, s->cbuf, s->cbsize);
s->modes |= modes & s_mode_append; /* don't lose append info */
s->position = pos;
}
s->file_modes = modes;
return 0;
}
|
