Plan 9 from Bell Labs’s /usr/web/sources/wiki/d/157.hist

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.


vmware4
D1138235504
Arsc (135.104.9.92)
#The VMware 4 disk image is now sorely outdated and is no longer
#distributed. You can install into a VMware4 virtual machine using
#the install CD just like on a real computer.
#
#Here are some tips on [dual booting bare machine and vmware] using
#the same physical disk for both, while avoiding a couple of pitfalls.
#
#Problems and work-arounds:
# *	There is a problem with the CDROM in VMWare 4.5. If you boot
#	Plan9 with a CDROM device attached to your virtual machine 9Load
#	will hang unless a CDROM is present ("connected"). If you don't
#	need CDROM support it is recommended that you remove the CDROM
#	device from your virtual machine. If you need this device, make
#	sure to keep a CD image attached.
#
# *	Problem with 9load hanging when booting in VMWare can be avoided
#	if you move the CD-ROM drive to the SCSI bus. VMWare allows SCSI
#	simulation for ATA CD-ROM drives: just select appropriate radio
#	button in the cd-rom settings dialog. SCSI controller (BT-958) is
#	supported by Plan 9. In this case use /dev/sd00 for access to CDROM
#	drive.
#
# *	There is a problem using more than two buttons on an IBM
#	Thinkpad. Russ Cox described a workaround on 9fans:
#
#! Date: Mon, 17 Feb 2003 09:43:25 -0500
#! Subject: [9fans] VMware and Plan9
#! 
#! Two things.  First, go into Control Panel -> Mouse -> Trackpoint
#! and make sure that the middle button setting is "neither" (there
#! are three choices: "scrolling", "zooming", and "neither").
#! 
#! Second, start regedit.  Look for
#! 
#! 	HKEY_LOCAL_MACHINE
#! 	 System
#! 	  CurrentControlSet
#! 	   Enum
#! 	    ACPI
#! 	     IBM3780
#! 	      <ugly hex>
#! 	       DeviceParameters
#! 
#! You may have to substitute something else for IBM3780 depending
#! on who makes your laptop.  Find the one with keys named "MouseResolution",
#! "MouseDataQueueSize", etc.  Add a new DWORD variable "NumberOfButtons"
#! with value 3.  
#! 
#! Now you should be okay.
#! 
#! The problem is actually not the IBM-supplied mouse driver but the
#! underlying Windows-supplied basic i8042 PS/2 mouse driver, on which
#! the Trackpoint driver sits.
#! 
#! The Windows driver expects the Trackpoint to respond to command E9
#! as the Logitech mice do, giving the number of buttons as the second byte.
#! Unfortunately, the Trackpoint sends back some form of sampling resolution
#! instead, and even more unfortunately the default resolution is encoded
#! as 0x02, tricking Windows into thinking that there are but two mouse
#! buttons on the Trackpoint.  Since this is the Trackpoint controller simply
#! implementing a different command E9, the only way to get the hardware
#! to respond correctly is to turn it off in the BIOS, so that the external
#! mouse can respond for itself.
#! 
#! Happily, Windows is nothing if not configurable.  The registry key makes
#! Windows ignore what it has incorrectly interpreted the hardware to have said.
#! DirectInput (which VMware uses, but most apps don't) ignores the middle
#! button when it thinks the mouse has only two buttons.  The stock Windows 
#! mouse path has no problem with a "two"-button mouse generating middle-button
#! events.
#! 
#! Russ
#

Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to webmaster@9p.io.