Dialup modem config
D1117094697
Anoselasd (80.239.96.162)
#To to configure a dialup connection to an isp, or other server,
#first edit /lib/ndb/local and add an entry specifying the telephone
#number for the isp, eg:
#
#! sys=MYISP
#! 	telco=01234,555,1234
#
#The the following script can be used to start a ppp session. If the
#modem is connected to the first serial port (COM1 on a pc) then eia1
#below should be changed to eia0.
#
#This script assumes factotum and ndb/cs is already running.
#
#! #!/bin/rc
#! #
#
#! if (! test -e /srv/telco )
#! 	telco /dev/eia1
#! if (! ip/ppp -f -P -b 57600 -k 'server=MYISP user=USERNAME'  -p telco!MYISP )
#! 	exit 1
#! ndb/dns -r
#! aux/timesync -n
#