Setting the right monitor size -Diff-


Sun May 13 08:39:20 CES 2012, glenda

Many people have trouble configuring their monitors to the right size after the installation. The file /lib/vgadb contains definitions for the most common display sizes and some peculiar hardware that Bell Labs or other 9fans have used. Once you've found the desirable size, set monitor= to that name in plan9.ini(8). If you can't find an appropriate monitor entry, you can add your own using the instructions in Adding a monitor to vgadb. If your plan9.ini file isn't located in /n/9fat/plan9.ini, type
	9fat: 

For example, this entry is being typed on a T30 laptop with 1400x1050 display. The plan9.ini on this machine has the following entry:

	monitor=t23

You can also change the resolution afterwards with aux/vga. Have a look at vga(8) for all details. In short:

	aux/vga -m vesa -l 1280x1024x16

or

	aux/vga -m vga -l

to reset the display to a known state.

Here's here is a list of some possible names for your display, for a complete list see /lib/vgadb:

vga=640x480				# 60Hz, 31.5KHz
vga=800x600				# 60Hz, 37.9KHz

svga=640x480
svga=800x600

cinema=1280x768				# VAIO (pcg tr1mp in vmware).
cinema=1152x768				# Titanium 550 (in virtual pc)

xga=1024x768
lcd=xga
multisync=1024x768
multisync=1024x768i
multisync=1152x900
multisync=1280x1024
multisync=1280x1024i
multisync=1376x1024

multisync65=multisync
multisync65=1024x768			# 60Hz, 48.4KHz

multisync75=multisync

multisync110=multisync			# Multisync monitors with video bandwidth up to 110MHz.

multisync135=multisync			# Multisync monitors with video bandwidth up to 135MHz.

t23=1400x1050				# IBM Thinkpad
t23=1280x1024
t23=1024x768

versa6xxx=1024x768			# NEC Versa 6030X/6200MX Laptop.
versa6xxx=800x600
versa6xxx=640x480

445x=1280x1024				# Nokia Multigraph 445X
445x=1600x1200				
445x=640x480					

p815=1800x1350				# Viewsonic P815
p815=1792x1350				# 70Hz, xx.xKHz
p815=1600x1200				# 75.4Hz, 93.5KHz
p815=1024x768

sgi1600sw=1600x1024			# SGI 1600SW Flat Panel
sgi1600sw=800x512