Nondestructive Evaluation in the Aircraft Industry
Wednesday 4 June, 10:20--12:10

Organizer: Bill TUCKER
General Electric/CRD
Moderator: Bill TUCKER
General Electric/CRD

NDE of Engine Components

James P. FULTON, Tim K. KEYES
General Electric/CRD, Schenectady NY, USA
NDE methods are very important to the manufacture and maintenance of aircraft engines. In this regard, it is critical to find various surface and subsurface defects. This talk will discuss the development of improved ultrasonic (UT) methods used for the detection of subsurface defects and analytical methods to derive improved estimation procedures for determining probability of detection (POD) and probability of false alarm (PFA) curves associated with the inspection methods. It is important to find and remove defects as early as possible in the production process. To this end, the development of a multizone UT system for the inspection of titanium billets will be covered. A multizone system has multiple transducers focused at increasing depths, which gives a much improved detection capability. The quantification of use of such a system to mitigate risk is determined by the resulting POD and PFA curves. The development of improved estimation procedures for POD and PFA based on signal-to-noise ratio concepts also will be discussed. This work is sponsored by the Engine Titanium Consortium under the auspices of the Federal Aviation Administration's program on Aging Aircraft.

[James P. Fulton, General Electric/CRD, KW-D244, PO Box 8, Schenectady NY, USA 12301]


Eddie Current Inspection Reliability in Detecting Cracks Beneath Rivets

Floyd W. SPENCER
Sandia National Laboratories, Albuquerque, NM, USA
In the maintenance of aging aircraft it is important to be able to find fatigue cracks in aircraft skins. Eddy current nondestructive inspection techniques are the method of choice for directed inspections in areas of an aircraft likely to develop fatigue cracking. Cracks that develop in skins beneath countersunk rivet heads are of specific concern, as these cracks will be "hidden" in the early stages of their growth. Results of validation efforts to quantify the capabilities of various existing and newly developed eddy current techniques will be reported. The validations consisted of inspections of test samples with cracks known only to the experimenter and not to the inspector. Regression techniques were used to fit signal data obtained against the known crack lengths. The results were used to derive probability of detection (PoD) curves as functions of crack length. Inspection factors influencing the capability estimates will be discussed. This work is sponsored through the Aviation R & D Program of the Federal Aviation Administration's William J. Hughes Technical Center.

[Floyd W. Spencer, MS 0829, Sandia National Laboratories, PO Box 5800, Albuquerque, NM 87185-0829, fwspenc@sandia.gov]


Back to JRC program
Back to JRC Home Page