Parametric Spectral EstimationNon-parametric (conventional) spectral
estimators such as the FFT or auto-correlation methods are limited
in their resolving power, requiring long observation intervals
in order to achieve acceptable accuracy and reduce leakage. For
data sets of short duration, these conventional techniques are
untenable, and an alternative approach is required. This has led
to parametric (model based) spectral estimation, which has proven
useful in extracting high resolution frequency spectra from relatively
short data sets, providing the structure of the signal is known.
The components of a known order related structure can be accurately
tracked and extracted from a background of noise and components
of an unknown structure.The basic idea is that if y(t) depends
on a finite set of parameters , then all of its statistical properties
can be expressed in terms of , including its power spectrum Pxx(f)
[SWAM95]. The most common and simplest of the parametric estimation
techniques is auto-regressive (AR) modelling of the signal. Auto-regressive
modelling consists of estimating the order of the coefficients
of , that when applied to the input signal will minimise the prediction-error
of the signal. Normally the minimisation criterion of the model
will be entropy based, which essentially maximises the random
nature of the error signal. The AR model of an input signal y(n)
can be represented as,where p is the order
of the model and a(k), k=1,2
p, are the auto-regressive
coefficients of the prediction process. The error of the model
is given by,
Non-Gaussian processes or
processes that include coloured noise can not be adequately modelled
by its second order statistics, motivating higher order parametric
estimation techniques, such as auto regressive moving average
(ARMA) estimation. However studies performed by C. K. Mechefske
[MECH94] in regards to short time sample for slowly rotating bearings,
and E. Lopatinskaia [LOPA94b] for the analysis of variable speed
machinery indicate that AR modelling of the vibration signal provides
an adequate model. Indeed, the additional information derived
by ARMA modelling often confuses the matter, and therefore complicates
the diagnosis process. Although AR and ARMA estimation have proven
successful in analysing signals of an evolutionary harmonic or
broad band nature, the problem of transient signal analysis can
still not be adequately addressed. Another mathematical model
approach that has been highly successful in analysing signals
of an evolutionary harmonic nature is adaptive Kalman filtering
[LEUR94]. However, as with AR and ARMA models, an accurate knowledge
of the signals structure is required before a reasonable model
can be obtained.