I was given an Ascend Pipeline 50 BRI interface at Christmas of 1994 by a very generous friend. Alas, the PRI interfaces at work were (and are) Combinet CB-900s and despite 15 years of ISDN hype, they couldn't be made to talk. Cisco since bought Combinet; click here and here for Cisco's current ISDN product line.
After upgrading the Combinet to software release 3.0.1, Ascend claimed that upgrading the Pipeline 50 to software release 4.5 from release 4.3 would let us talk to the Combinet. The undocumented and unexpected (and ridiculous) thing that you have to know to upgrade the software of a Pipeline 50 is that when it initiates the xmodem transfer to download the new software, it also drops DTR (carrier)! Sheesh. So you need to either set up your host software to assume carrier is always present, or wire up a special cable.
Once we learned that from an Ascend employee, we upgraded to 4.5 and everything just worked, at least for IP, TCP and UDP (see below).
And it only took 10.5 months to get it working. The miracle of standardisation. Now the ISDN boosters just need to increase the speed before the next doubling of dial-up modem speeds (i.e. the 56kb/s modems now appearing) nearly matches a single B channel and the one after that nearly matches both B channels. :-)
Just because the telephone network has been all-digital except for the local loops for decades, and just because ISDN has been hyped to the high heavens for over a decade, don't expect your local phone installer to have a clue when they try to install your ISDN line. They are only now (late 1995) starting to understand ISDN. Bell Atlantic in New Jersey (nee New Jersey Bell) got a head start and so are way ahead of NYNEX.
Worse, they may expect you, the end user, to absorb and even understand vast reams of telephony jargon, particularly if something doesn't work. It's a really good idea to have all your ISDN equipment purchased and tested before the installers show up (test it somewhere else). Then don't let the installers leave your house until you are satisfied that it's all working. If you have to call for help with your line later, they'll expect you to know TEIs and SPIDs and even more obscure stuff, so be sure to hang on to any paperwork they give you.
You probably want an external NT-1, not one built into your ISDN-to-Ethernet box; this leaves open the possibility of future ISDN whizziness (the ISDN standards people think you have a bus running out of your NT-1). For this you'll probably need 2-, 4-, 6- and 8-wire cables (the 8-wire cables are called D8W). You can expect some of the wiring diagrams that come with your NT-1 and your ISDN-to-Ethernet box to be wrong or inapplicable.
The interoperability problems aren't over. It looks like my Ascend BRI is causing problems for our Combinet PRI (I've had connections mysteriously drop and after weeks of using the Ascend BRI, the Combinet PRI will crash) and vice versa (I get runs of checksum errors). The checksum errors are only seen when using Plan 9's IL protocol, which runs over IP in place of TCP and UDP and is needed to talk to the plan 9 file servers. I suspect rogue Van-Jacobson header compression in the Ascend box. In any case, we've demonstrated that this is not a problem between a Combinet 2060 BRI and a Combinet CB-900 PRI, so it's clearly an interoperability problem.